tranny cooler?

hotrod ford · Post by **hotrod ford** » Fri Aug 31, 2007 12:09 am

i have a factory made tranny cooler between my grill and radiator. as of now its not hooked up. i assume this would be a great area for it but how do i run the tubing from the radiator to it?

Post by **FORDification** » Fri Aug 31, 2007 12:23 am

Bend some steel line, flare it and hook it up. Since your automatic should already have lines going up to the cooler built into the radiator, you only have to fabricate one line extension from one of the lines up to the cooler...essentially mounting it inline with the existing radiator cooler.

hotrod ford · Post by **hotrod ford** » Fri Aug 31, 2007 12:27 am

that sounds good. it looks like it has sit there for a while though. what would be a good way to clean it out?

craftsman · Post by **craftsman** » Fri Aug 31, 2007 6:27 am

spray some parts cleaner in it and then blow through with air compressor.

fordman · Post by **fordman** » Fri Aug 31, 2007 5:21 pm

or just spray air thru it .

Tim P. · Post by **Tim P.** » Sat Sep 01, 2007 11:37 pm

craftsman wrote:spray some parts cleaner in it and then blow through with air compressor.

Better use some cleaner thru it first then air dont need pieces of corrision getting in the fluid

The FORDification.com Forums

tranny cooler?

tranny cooler?

re: tranny cooler?

re: tranny cooler?