#17 - Oct. 05, 2007

[FORDification]

This one should be pretty easy for you all too...no hints, what is pictured above?

[lightning_msd]

im guessing its a plug of somekind on the lower part of the cab...

[RedneckTexan]

I'm guessing a plug on a base line truck, that's plugging up a hole intended for a well optioned truck, for something optional that should be there (like a radio delete plug) and I'm going to say its on the firewall

[fordman]

i think that is one of those electric wire holders for the inner fenders or some place in the enigne compartment. most times they end up breaking if you try to remove them.

[rjewkes]

its the engine comp. side of the firewall cover hold down pins/

[kaptnkaos]

I think it is one of the license plate holders and screw...
or possibly one of the pins from an insignia badge...

but it looks like one of them critters from Dune

KaptnKA S

[HOWDY69]

That's one them critters from Tremors come to get Reba

[flyboy2610]

its the engine comp. side of the firewall cover hold down pins/

That would be my guess as well.

[FORDification]

[fordman]

its too dark to go out and look around my trucks

[rjewkes]

its on a rusty frame but it is the part of the brake line and tail wire harness hold down things that sticks through the fram.

[fordman]

yes thats it.
i knew i ried to save those before and it just broke
i knew it was something i had seen beofre
good job robert

[FORDification]

Yep, it's the back side of one of the brake and fuel line hold-down clamps.

[rjewkes]

i would like to thank everybody here.....

[RedneckTexan]

Good job Robert