NY, NJ, & PA Racenight/M&G

List car shows, swap meets, meetings here

Moderator: FORDification

Post Reply
User avatar
FLATBEDFORD
100% FORDified!
100% FORDified!
Posts: 1818
Joined: Sat Feb 18, 2006 1:34 pm
Location: New York, Crugers
Contact:

NY, NJ, & PA Racenight/M&G

Post by FLATBEDFORD »

Here we will discuss where when and how to pull this off.
As far as I know we have
MaxKlinger
FLATBEDFORD
AlleyCat
Should have
71 LONGBED
cooltoolguy
Anybody else?

We should think of a Northern NJ, Southwestern, NY or Eastern, PA location. June or later would be best for me.
Steve

1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013

My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
User avatar
MaxKlinger
Blue Oval Fan
Blue Oval Fan
Posts: 541
Joined: Tue Jun 05, 2007 9:07 am
Location: Philadelphia

re: NY, NJ, & PA Racenight/M&G

Post by MaxKlinger »

Steve, good call on the new thread. :thup:

I'm asking around at work for race tracks (dirt, drag, oval, whatever) in eastern PA. Maybe something in the Scranton area would work out for us?

Who else do we have in the area? Pipes71?
Tony
'72 F100 LWB 2WD Custom, 360FE, T18
'05 Focus ZX4 ST - 2.3L, 5spd
'83 F150 LWB 2WD, 300-I6, C6 scrapped 2006
User avatar
FLATBEDFORD
100% FORDified!
100% FORDified!
Posts: 1818
Joined: Sat Feb 18, 2006 1:34 pm
Location: New York, Crugers
Contact:

Post by FLATBEDFORD »

ford7379trucks is North of middletown, ny
Steve

1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013

My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
User avatar
FLATBEDFORD
100% FORDified!
100% FORDified!
Posts: 1818
Joined: Sat Feb 18, 2006 1:34 pm
Location: New York, Crugers
Contact:

Post by FLATBEDFORD »

ford7379trucks is North of middletown, ny. Maybe post in "General Discussion"
I don't know how far Bonnie will want to travel, in the old truck, to a race track. That's why Middletown was good. Somewhat close for all of us. Not very close to Pittsburg though. But Clay (AlleyCat) is single.
Steve

1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013

My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
ladz
New Member
New Member
Posts: 141
Joined: Thu Jan 19, 2006 5:47 pm
Location: Pennsylvania

re: NY, NJ, & PA Racenight/M&G

Post by ladz »

Id be in for this. You could use Atco raceway as a meeting place or maple grove.
User avatar
MaxKlinger
Blue Oval Fan
Blue Oval Fan
Posts: 541
Joined: Tue Jun 05, 2007 9:07 am
Location: Philadelphia

re: NY, NJ, & PA Racenight/M&G

Post by MaxKlinger »

Welcome aboard ladz, I hope you can make it out. Where in PA are you located?

Atco's not bad, I used to go all the time while in college in Philly. If we were going to hit a drag strip in NJ, I'd be more inclined to hit Englishtown (Old Bridge) since it's farther north.
Tony
'72 F100 LWB 2WD Custom, 360FE, T18
'05 Focus ZX4 ST - 2.3L, 5spd
'83 F150 LWB 2WD, 300-I6, C6 scrapped 2006
ladz
New Member
New Member
Posts: 141
Joined: Thu Jan 19, 2006 5:47 pm
Location: Pennsylvania

re: NY, NJ, & PA Racenight/M&G

Post by ladz »

Thats a good call Englishtown would be nice and im out of northeast philadelphia. I think my trucks ready for the 1/4 mile :drive:. Now what my dad thinks is another story haha. But im already excited for this.
User avatar
71 LONG BED
100% FORDified!
100% FORDified!
Posts: 1588
Joined: Wed Jun 14, 2006 7:28 am
Location: Hamburg, NJ

re: NY, NJ, & PA Racenight/M&G

Post by 71 LONG BED »

If Raceway Park is an option, then we should go for the Swap Meet in April. We can hang, B-B-Q, buy stuff, etc.. Just throwing the idea out there...
John Member #1549
71 F100 Sport Custom__________1967 F350 Gone, but not forgotten
Image Image Image
ladz
New Member
New Member
Posts: 141
Joined: Thu Jan 19, 2006 5:47 pm
Location: Pennsylvania

re: NY, NJ, & PA Racenight/M&G

Post by ladz »

Thats a good idea I've heard about the raceway park swap meet. From what i hear its a pretty good time.
User avatar
FLATBEDFORD
100% FORDified!
100% FORDified!
Posts: 1818
Joined: Sat Feb 18, 2006 1:34 pm
Location: New York, Crugers
Contact:

Post by FLATBEDFORD »

When in April?
Steve

1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013

My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
User avatar
FLATBEDFORD
100% FORDified!
100% FORDified!
Posts: 1818
Joined: Sat Feb 18, 2006 1:34 pm
Location: New York, Crugers
Contact:

Post by FLATBEDFORD »

I just checked, April 18, 19, 20. It's 83 miles from me. My wife has a big birthday on the 22nd. A swap meet may not be her idea of a birthday celebration.
Last edited by FLATBEDFORD on Fri Feb 08, 2008 8:48 am, edited 1 time in total.
Steve

1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013

My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Post by Ranchero50 »

I think those dates are spring Carlisle as well.

I may be game if I can get the truck back together...

Jamie
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
User avatar
MaxKlinger
Blue Oval Fan
Blue Oval Fan
Posts: 541
Joined: Tue Jun 05, 2007 9:07 am
Location: Philadelphia

re: NY, NJ, & PA Racenight/M&G

Post by MaxKlinger »

I've been meaning to get to one of the Carlisle events, I've never been to them before. Hmmmmm.....

At some point a MnG at Carlisle wouldn't be a bad idea. Probably not this time around though.
Tony
'72 F100 LWB 2WD Custom, 360FE, T18
'05 Focus ZX4 ST - 2.3L, 5spd
'83 F150 LWB 2WD, 300-I6, C6 scrapped 2006
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Post by Ranchero50 »

I'll be at the All Fords show, last weekend in May, first in June...

www.carsatcarlisle.com

There were very few bumps there last year. I hope to have mine done and at the show.

Jamie
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
User avatar
kilog55
Preferred User
Preferred User
Posts: 399
Joined: Sun Feb 10, 2008 1:07 pm
Location: Lenoxville, Pennsyltucky

Post by kilog55 »

not really any tracks up here near scranton. there is the Penn Cann dirt track but there isnt much around it for things to do. im just north of scranton
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
Post Reply