NY, NJ, & PA Racenight/M&G
Moderator: FORDification
- FLATBEDFORD
- 100% FORDified!
- Posts: 1818
- Joined: Sat Feb 18, 2006 1:34 pm
- Location: New York, Crugers
- Contact:
NY, NJ, & PA Racenight/M&G
Here we will discuss where when and how to pull this off.
As far as I know we have
MaxKlinger
FLATBEDFORD
AlleyCat
Should have
71 LONGBED
cooltoolguy
Anybody else?
We should think of a Northern NJ, Southwestern, NY or Eastern, PA location. June or later would be best for me.
As far as I know we have
MaxKlinger
FLATBEDFORD
AlleyCat
Should have
71 LONGBED
cooltoolguy
Anybody else?
We should think of a Northern NJ, Southwestern, NY or Eastern, PA location. June or later would be best for me.
Steve
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
- MaxKlinger
- Blue Oval Fan
- Posts: 541
- Joined: Tue Jun 05, 2007 9:07 am
- Location: Philadelphia
re: NY, NJ, & PA Racenight/M&G
Steve, good call on the new thread.
I'm asking around at work for race tracks (dirt, drag, oval, whatever) in eastern PA. Maybe something in the Scranton area would work out for us?
Who else do we have in the area? Pipes71?
I'm asking around at work for race tracks (dirt, drag, oval, whatever) in eastern PA. Maybe something in the Scranton area would work out for us?
Who else do we have in the area? Pipes71?
Tony
'72 F100 LWB 2WD Custom, 360FE, T18
'05 Focus ZX4 ST - 2.3L, 5spd
'83 F150 LWB 2WD, 300-I6, C6 scrapped 2006
'72 F100 LWB 2WD Custom, 360FE, T18
'05 Focus ZX4 ST - 2.3L, 5spd
'83 F150 LWB 2WD, 300-I6, C6 scrapped 2006
- FLATBEDFORD
- 100% FORDified!
- Posts: 1818
- Joined: Sat Feb 18, 2006 1:34 pm
- Location: New York, Crugers
- Contact:
ford7379trucks is North of middletown, ny
Steve
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
- FLATBEDFORD
- 100% FORDified!
- Posts: 1818
- Joined: Sat Feb 18, 2006 1:34 pm
- Location: New York, Crugers
- Contact:
ford7379trucks is North of middletown, ny. Maybe post in "General Discussion"
I don't know how far Bonnie will want to travel, in the old truck, to a race track. That's why Middletown was good. Somewhat close for all of us. Not very close to Pittsburg though. But Clay (AlleyCat) is single.
I don't know how far Bonnie will want to travel, in the old truck, to a race track. That's why Middletown was good. Somewhat close for all of us. Not very close to Pittsburg though. But Clay (AlleyCat) is single.
Steve
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
-
- New Member
- Posts: 141
- Joined: Thu Jan 19, 2006 5:47 pm
- Location: Pennsylvania
re: NY, NJ, & PA Racenight/M&G
Id be in for this. You could use Atco raceway as a meeting place or maple grove.
- MaxKlinger
- Blue Oval Fan
- Posts: 541
- Joined: Tue Jun 05, 2007 9:07 am
- Location: Philadelphia
re: NY, NJ, & PA Racenight/M&G
Welcome aboard ladz, I hope you can make it out. Where in PA are you located?
Atco's not bad, I used to go all the time while in college in Philly. If we were going to hit a drag strip in NJ, I'd be more inclined to hit Englishtown (Old Bridge) since it's farther north.
Atco's not bad, I used to go all the time while in college in Philly. If we were going to hit a drag strip in NJ, I'd be more inclined to hit Englishtown (Old Bridge) since it's farther north.
Tony
'72 F100 LWB 2WD Custom, 360FE, T18
'05 Focus ZX4 ST - 2.3L, 5spd
'83 F150 LWB 2WD, 300-I6, C6 scrapped 2006
'72 F100 LWB 2WD Custom, 360FE, T18
'05 Focus ZX4 ST - 2.3L, 5spd
'83 F150 LWB 2WD, 300-I6, C6 scrapped 2006
-
- New Member
- Posts: 141
- Joined: Thu Jan 19, 2006 5:47 pm
- Location: Pennsylvania
re: NY, NJ, & PA Racenight/M&G
Thats a good call Englishtown would be nice and im out of northeast philadelphia. I think my trucks ready for the 1/4 mile . Now what my dad thinks is another story haha. But im already excited for this.
- 71 LONG BED
- 100% FORDified!
- Posts: 1588
- Joined: Wed Jun 14, 2006 7:28 am
- Location: Hamburg, NJ
re: NY, NJ, & PA Racenight/M&G
If Raceway Park is an option, then we should go for the Swap Meet in April. We can hang, B-B-Q, buy stuff, etc.. Just throwing the idea out there...
John Member #1549
71 F100 Sport Custom__________1967 F350 Gone, but not forgotten
71 F100 Sport Custom__________1967 F350 Gone, but not forgotten
-
- New Member
- Posts: 141
- Joined: Thu Jan 19, 2006 5:47 pm
- Location: Pennsylvania
re: NY, NJ, & PA Racenight/M&G
Thats a good idea I've heard about the raceway park swap meet. From what i hear its a pretty good time.
- FLATBEDFORD
- 100% FORDified!
- Posts: 1818
- Joined: Sat Feb 18, 2006 1:34 pm
- Location: New York, Crugers
- Contact:
When in April?
Steve
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
- FLATBEDFORD
- 100% FORDified!
- Posts: 1818
- Joined: Sat Feb 18, 2006 1:34 pm
- Location: New York, Crugers
- Contact:
I just checked, April 18, 19, 20. It's 83 miles from me. My wife has a big birthday on the 22nd. A swap meet may not be her idea of a birthday celebration.
Last edited by FLATBEDFORD on Fri Feb 08, 2008 8:48 am, edited 1 time in total.
Steve
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
- MaxKlinger
- Blue Oval Fan
- Posts: 541
- Joined: Tue Jun 05, 2007 9:07 am
- Location: Philadelphia
re: NY, NJ, & PA Racenight/M&G
I've been meaning to get to one of the Carlisle events, I've never been to them before. Hmmmmm.....
At some point a MnG at Carlisle wouldn't be a bad idea. Probably not this time around though.
At some point a MnG at Carlisle wouldn't be a bad idea. Probably not this time around though.
Tony
'72 F100 LWB 2WD Custom, 360FE, T18
'05 Focus ZX4 ST - 2.3L, 5spd
'83 F150 LWB 2WD, 300-I6, C6 scrapped 2006
'72 F100 LWB 2WD Custom, 360FE, T18
'05 Focus ZX4 ST - 2.3L, 5spd
'83 F150 LWB 2WD, 300-I6, C6 scrapped 2006
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
I'll be at the All Fords show, last weekend in May, first in June...
www.carsatcarlisle.com
There were very few bumps there last year. I hope to have mine done and at the show.
Jamie
www.carsatcarlisle.com
There were very few bumps there last year. I hope to have mine done and at the show.
Jamie
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
- kilog55
- Preferred User
- Posts: 399
- Joined: Sun Feb 10, 2008 1:07 pm
- Location: Lenoxville, Pennsyltucky
not really any tracks up here near scranton. there is the Penn Cann dirt track but there isnt much around it for things to do. im just north of scranton
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437