Any one found a source for these?
or a suitable substitute?
Fuel Tank Sending Unit Sealing Washers (on bolts)
-
DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Fuel Tank Sending Unit Sealing Washers (on bolts)
Last edited by DuckRyder on Fri Jul 01, 2005 5:50 pm, edited 1 time in total.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
heep70
- 100% FORDified!
- Posts: 2039
- Joined: Mon Sep 13, 2004 11:03 pm
- Location: Washington, Bonney Lake
- Contact:
re: Fuel Tank Sending Unit Sealing Wahers (on bolts)
Ya, that is a tuff one. Somebudy here has probaly found them, I am just to lazy. I used little O-rings. They worked just fine. 
Greg
1971 F250 "Highboy". SOLD to "Highboy_Firefighter_71"
2000 Subaru Outback limited.
2000 F250 4X4 PSD SuperDuty Crew.
2010 Polaris 800RMK Dragon 155"
2013 Polaris Pro 800 RMK 163"
1980 Built Toyota "Trail Rig".
My last 1971 "Highboy" pics
1971 F250 "Highboy". SOLD to "Highboy_Firefighter_71"
2000 Subaru Outback limited.
2000 F250 4X4 PSD SuperDuty Crew.
2010 Polaris 800RMK Dragon 155"
2013 Polaris Pro 800 RMK 163"
1980 Built Toyota "Trail Rig".
My last 1971 "Highboy" pics
-
hardtailjohn
- Preferred User
- Posts: 422
- Joined: Tue Dec 07, 2004 10:24 pm
- Location: Montana, Marion
re: Fuel Tank Sending Unit Sealing Wahers (on bolts)
You can order them from www.aircraftspruce.com under part number 04-00217 for a #8 screw size or part number 04-00218 for a #10 screw size (which is 3/16 inch). Price should be around .02 each.
John H.
John H.
Never trust a grinning idiot holding a big hammer!