shifter cutout
Moderator: FORDification
-
customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
shifter cutout
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
-
Pipes71
- Preferred User
- Posts: 275
- Joined: Mon Apr 23, 2007 8:21 am
- Location: New Jersey
re: shifter cutout
thats sick looking! Did you make it yourself?
Tony
bumpless but still diggin them....
bumpless but still diggin them....
-
kaptnkaos
- 100% FORDified!
- Posts: 2029
- Joined: Thu Feb 16, 2006 1:27 am
- Location: Washington, Elma
re: shifter cutout
Nice clean install CCC, looks good...
Washington...The land where rust is like the family pet...Ya learn to live with it and clean up after its mess... KaptnKAOS
"Olde Skool" '68 Ford Bluebird short bus
"FRODO" '68 F-250 Camper Special project
"Olde Skool" '68 Ford Bluebird short bus
"FRODO" '68 F-250 Camper Special project
-
customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
Re: re: shifter cutout
yes and no. i designed it in autocad and sent it to the waterjet to be cut out. i still need to file the edges and give it that brushed look. 20 bucks to cut it and that was with materials. gave my buddy a few bucks to drill and tap it with a 5/16 and then he made an adapter for the ball because its 16mm. he's got the mill and lathe.Pipes71 wrote:thats sick looking! Did you make it yourself?
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners