its turn way down right now. hes has about 3000 in in aem equipment under the dash and is still playing with the programing. it building boost super fast. you got to remember theres two to4 on there so theres alot of presure that built up before the blowoff valve went off. this was also just reving it up. turbos build most boost under a load. . we had a innercooler pop the welds on a mustang with around 20 pounds. its hard to tell with boost becuase the smaller cubic inches the easier it is to build boost. that mustang that pop the innercooler was a 331 with a single turbo. i was told it made around 800 on the dyno. that seem high to me but its not hard to make 600. i have a 393 with 185 afr heads and turbo cam. 42 pound injectors and accufab 75 mm thorttle body. i have a wastgate, blowoff valve and fuel pump thats will handle a 1000 hp but the motor should be betwwen 600 to 700 i hope.
i also forgot the more restrictive and smaller ci the more boost will show. the less restrictive and the bigger ci the less boost. so it dosn't mean that the car wit the most boost showing it making the best boost.
What do you guys think, opinions please.
- customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
re: What do you guys think, opinions please.
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
- willowbilly3
- 100% FORDified!
- Posts: 1591
- Joined: Mon Jul 19, 2004 7:38 pm
- Location: Black Hills
re: What do you guys think, opinions please.
Hey 67, do not be totally discouraged. While a heater blower cannot produce any real boost, you could still use it to pull cool air into the aircleaner. And cooler air is more dense, thusly creating more power.
Great ideas have always encounter violent opposition from mediocre minds.
- customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
re: What do you guys think, opinions please.
here a cool blower thats under 400 for now. it works like your ac. locks up the clutch and then starts to build boost. can turn it off too. they been around for years.
http://cgi.ebay.com/ebaymotors/McCulloc ... 1979QQrdZ1
http://cgi.ebay.com/ebaymotors/McCulloc ... 1979QQrdZ1
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
- customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
re: What do you guys think, opinions please.
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
- customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
re: What do you guys think, opinions please.
heres some more carb hats that procharger one is real nice and its only at 15 bucks. i would buy it and hang it on the wall of theshop for that price
but i'll let somone who can use it buy it.
http://motors.search.ebay.com/Carb-Hat_ ... 0QQsaspiZ2
but i'll let somone who can use it buy it.
http://motors.search.ebay.com/Carb-Hat_ ... 0QQsaspiZ2
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
- 72hiboy4x4
- Blue Oval Fanatic
- Posts: 978
- Joined: Sat Jan 01, 2005 8:53 pm
- Location: As far away as I can be from Wa state, without crossing the Mississippi
- Contact:
here's an alternative to a 12v blower that actually works!!
http://videos.streetfire.net/Player.asp ... CA9564&p=0
http://videos.streetfire.net/Player.asp ... CA9564&p=0
In life many men take the path of righteousness, some take the path many others follow (G.M. owners, for example), some take a more arduous path, some a simpler path. I, sir, took the PSYCO-PATH!!