67 2wd to 4wd....

zakt · Post by **zakt** » Fri Jun 10, 2005 8:05 pm

getting ready to pull the 67' F350 2wd front end off...coil buckets and all. I will have all the pieces if anyone is interested in any pieces for a good deal etc. PM me with an offer.. Im in Reno, NV.

heep70 · Post by **heep70** » Fri Jun 10, 2005 8:08 pm

Keep us tuned in.

Heavenlyfire · Post by **Heavenlyfire** » Fri Jun 10, 2005 8:10 pm

Good luck to ya, keep us up to date. I am thinking of that in the future.

zakt · Post by **zakt** » Tue Jun 14, 2005 8:41 pm

The front is removed now onto pulling all the rivets to get the brackets off...

zakt · Post by **zakt** » Fri Aug 05, 2005 11:08 pm

Now have my 12" springs mounted on the rear off my 85' using the 85' hangers.. now onto getting the axle perches redone to fit the new springs..

http://www.geocities.com/crewcab1967/

4x4x4crewcab · Post by **4x4x4crewcab** » Sun Aug 07, 2005 10:56 pm

Hey Todd looking good. We haven't heard from you in a while figured you were busy on the project. Keep up the good work and thanks for the update.

69F110 · Post by **69F110** » Thu Aug 11, 2005 2:10 am

Looking good. Keep us updated.

zakt · Post by **zakt** » Mon Aug 29, 2005 8:34 pm

Just bought the new engine towers and motor mounts from L&L to swap the 360 to the 460 motor. I will be using my 95' motor which is EFI and buying a mass air kit from http://www.mass-air.com/Products.htm#Tr ... Air%20Kits using the 80mm mass air with 30lb injectors... with the E40D... just debating now if I want the gear vendors auxilary transmission. I think I might just put it on so I get the length out of the driveline to get away from using the carrier bearing in the drive line....

4x4x4crewcab · Post by **4x4x4crewcab** » Tue Aug 30, 2005 7:15 pm

460 E.F.I. and E4OD fancy,fancy this is gonna be a nice machine. Thanks for the update

boots · Post by **boots** » Tue Aug 30, 2005 9:05 pm

i wanted to do this with my truck, but never got around to it. Thoes are massive springs!!! keep us posted pls

69F110 · Post by **69F110** » Fri Sep 09, 2005 8:56 am

Cool stuff.

zakt · Post by **zakt** » Mon Sep 12, 2005 5:45 pm

I cant find a place that makes a adapter to mate a NP205 transfer case to the E40D transmission... So back to C6 transmission with married NP205 transfer case with the gear vendors auxilary transmission... so more or less I will have overdrive

Heavenlyfire · Post by **Heavenlyfire** » Tue Sep 13, 2005 12:29 pm

Lots of details on the front end swap please, this is something I have been thinking about for a while. I really miss having a 4X4

zakt · Post by **zakt** » Tue Sep 13, 2005 6:20 pm

check out the frame pictures of the 2wd vrs 4wd... crossmembers are different in the front and then looks like the 4wd is boxed where as the 2wd is not... so debating now what to do with that...

http://www.fordification.com/images/sch ... _frame.jpg

http://www.fordification.com/images/sch ... _frame.jpg

zakt · Post by **zakt** » Wed Sep 14, 2005 3:37 pm

Looks like I will use the 2wd engine tower locations and pull the 2wd crossmember and make a better looking custom built one like below...

The FORDification.com Forums

67 2wd to 4wd....

67 2wd to 4wd....

re: 67 2wd to 4wd....

re: 67 2wd to 4wd....

re: 67 2wd to 4wd....

re: 67 2wd to 4wd....

re: 67 2wd to 4wd....

re: 67 2wd to 4wd....

re: 67 2wd to 4wd....

re: 67 2wd to 4wd....

re: 67 2wd to 4wd....

re: 67 2wd to 4wd....

re: 67 2wd to 4wd....