Here's my truck with 265/75r15's on the stock rims. I don't think you could get much bigger on a stock truck and not have interference problems.
rim width
Moderator: FORDification
-
poleman
- New Member
- Posts: 24
- Joined: Thu Jun 02, 2005 11:43 am
- Location: Texas, Georgetown
Re: rim width
Here's my truck with 265/75r15's on the stock rims. I don't think you could get much bigger on a stock truck and not have interference problems.
-
DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: rim width
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
-
fordman
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: rim width
you can get 6 inch wide wheels from 73-79 trucks. i don't know what size the 80 and up trucks are. but they probably wont be 7 1/2 unless you get some of the lightning wheels or the bullet hole wheels. the bullet hole wheels (modulars) are 8 inches wide.
-
ezernut9mm
- 100% FORDified!
- Posts: 2803
- Joined: Sun Nov 26, 2006 5:25 pm
- Location: Missouri, Kansas City
Re: rim width
just keep searching craigslist. after a year i finally found the 8" wide wheels i was looking for. i also know that doug comer on this site has some 8" wide factory wheels for sale. or at least he did.
wanting to buy a mercury tailgate!
"the man who is swimming against the stream knows the strength of it".- woodrow wilson
"the man who is swimming against the stream knows the strength of it".- woodrow wilson