Stuck on a lay over in Dallas
Moderator: FORDification
- FreakysFords
- Blue Oval Fanatic
- Posts: 815
- Joined: Mon Mar 09, 2009 9:58 pm
- Location: Gadsden Alabama
- Contact:
Stuck on a lay over in Dallas
Just posting to vent, sorry. Stuck in Dallas TX on lay over with no call of a load out.
Anyone need anything shipped out of here?
OK, back to reality.
Have a good one all,
Frank
Anyone need anything shipped out of here?
OK, back to reality.
Have a good one all,
Frank
Darlin 69 Ranger 390 4v, PS, DS II, disc front, 3G alternator, 67 mirror.
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- TX69F100
- New Member
- Posts: 192
- Joined: Mon Jun 14, 2010 1:30 pm
- Location: Sunnyvale, TX
Re: Stuck on a lay over in Dallas
It's HOT here today!
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: Stuck on a lay over in Dallas
94` in the garage...
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
- TX69F100
- New Member
- Posts: 192
- Joined: Mon Jun 14, 2010 1:30 pm
- Location: Sunnyvale, TX
Re: Stuck on a lay over in Dallas
It's dropped to a chilly 97* here now...
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: Stuck on a lay over in Dallas
it was hot here most of the day and then about an hour ago it rained liek cats and dogs. in about ten minutes then it quit and got right back up to 90 a few seconds later. i got a sun burn withing minutes early today just stripping out a trans pan and valve body. i wasnt out there more than 20 minutes.
- ForingaMex
- Blue Oval Fan
- Posts: 590
- Joined: Thu May 21, 2009 8:18 pm
- Location: Ontario, Canada
Re: Stuck on a lay over in Dallas
I wish I was in Dallas right now, I miss it. I did a run to Dallas (Arlington to be exact) from southern Ontario once a week for about 2 years. That was a pretty nice run.
-Jake
"Better to remain silent and be thought a fool than to speak out and remove all doubt." -Abraham Lincoln
-02 Dodge Ram Quad Cab
-72 Ford F100 LWB 390/C6 (Retired for now till I can rebuild/transform it)
-2000 Ford Windstar (Family Vehicle)
-92 VW Beetle (Mexican)
"Better to remain silent and be thought a fool than to speak out and remove all doubt." -Abraham Lincoln
-02 Dodge Ram Quad Cab
-72 Ford F100 LWB 390/C6 (Retired for now till I can rebuild/transform it)
-2000 Ford Windstar (Family Vehicle)
-92 VW Beetle (Mexican)
- FreakysFords
- Blue Oval Fanatic
- Posts: 815
- Joined: Mon Mar 09, 2009 9:58 pm
- Location: Gadsden Alabama
- Contact:
Re: Stuck on a lay over in Dallas
Actually, this run was to the GM plant in Arlington, but picked up a couple local runs in Dallas from there. Kinda hard to get a load out of the area atm. Might have to dead head to Shreveport or somewhere today.
and LOL to the CL deal. I did and man at what I want but can not have. Will have to leave room on one of the next runs.
Frank
and LOL to the CL deal. I did and man at what I want but can not have. Will have to leave room on one of the next runs.
Frank
Darlin 69 Ranger 390 4v, PS, DS II, disc front, 3G alternator, 67 mirror.
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Stuck on a lay over in Dallas
Frank,
Be careful out there man, I'm on the road locally here in Central Florida everyday.
Lots of crazy folks driving the roads these days.
Be careful out there man, I'm on the road locally here in Central Florida everyday.
Lots of crazy folks driving the roads these days.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- ForingaMex
- Blue Oval Fan
- Posts: 590
- Joined: Thu May 21, 2009 8:18 pm
- Location: Ontario, Canada
Re: Stuck on a lay over in Dallas
I can tell you from experience that there are no crazy drivers in Dallas, or Texas as a whole for that matter.
-Jake
"Better to remain silent and be thought a fool than to speak out and remove all doubt." -Abraham Lincoln
-02 Dodge Ram Quad Cab
-72 Ford F100 LWB 390/C6 (Retired for now till I can rebuild/transform it)
-2000 Ford Windstar (Family Vehicle)
-92 VW Beetle (Mexican)
"Better to remain silent and be thought a fool than to speak out and remove all doubt." -Abraham Lincoln
-02 Dodge Ram Quad Cab
-72 Ford F100 LWB 390/C6 (Retired for now till I can rebuild/transform it)
-2000 Ford Windstar (Family Vehicle)
-92 VW Beetle (Mexican)
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- FreakysFords
- Blue Oval Fanatic
- Posts: 815
- Joined: Mon Mar 09, 2009 9:58 pm
- Location: Gadsden Alabama
- Contact:
Re: Stuck on a lay over in Dallas
, Dallas isn't exactly my favorite location as to hauling brokered loads with no scheduled load back out. Can take forever to find another.
Finally made it out though. Got a load late Fri and headed out.
I'm just outside of Seattle, Washington at the moment and will layover tonight to wait for shipping to open tomorrow. Then hopefully I'll get a load back out quickly.
Who all's in or near the Seattle area?
Take care all,
Frank
Finally made it out though. Got a load late Fri and headed out.
I'm just outside of Seattle, Washington at the moment and will layover tonight to wait for shipping to open tomorrow. Then hopefully I'll get a load back out quickly.
Who all's in or near the Seattle area?
Take care all,
Frank
Darlin 69 Ranger 390 4v, PS, DS II, disc front, 3G alternator, 67 mirror.
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Stuck on a lay over in Dallas
Hope all's going well out there on the road buddy!
I think our own Kap'n Kaos was from the Seattle area?
I know there's quite a few members here in that area.
I could be wrong, (yeah been wrong once or twice before)Who all's in or near the Seattle area?
I think our own Kap'n Kaos was from the Seattle area?
I know there's quite a few members here in that area.
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- FreakysFords
- Blue Oval Fanatic
- Posts: 815
- Joined: Mon Mar 09, 2009 9:58 pm
- Location: Gadsden Alabama
- Contact:
Re: Stuck on a lay over in Dallas
Home to Huntsville AL, to Chicago, to Belvidere, IL, to Dallas, TX, to Seattle, to Eugene OR, to El Dorado, AR, to......................
HOME!!!!!!
Gonna be home for a week to two weeks, trying to get a brokerage setup (bad brokers are why I got out of this, should have made my own back then), before I head back out for another 2 to 3 week trip.
Eventually I want to have some decent portions of the trip planned in advance (hence the brokerage) and will be building a site to show where I am and where I'm going. The idea is to haul some bump parts from member to member and some bike parts of the same from my favorite bike forum, and hopefully meet some folk along the way. Once I get it all set up, I'll start offering to pickup parts from one member to take to the next (along my route) for zero to nearly zero $ (gotta warm the partner up to zero first). Hopefully this will give us a way to move some of the awkward parts around that UPS and others turn down or charge way too much on.
Anyway, this is still in the future at this point. Now to go do some research into building a brokerage.
Frank
HOME!!!!!!
Gonna be home for a week to two weeks, trying to get a brokerage setup (bad brokers are why I got out of this, should have made my own back then), before I head back out for another 2 to 3 week trip.
Eventually I want to have some decent portions of the trip planned in advance (hence the brokerage) and will be building a site to show where I am and where I'm going. The idea is to haul some bump parts from member to member and some bike parts of the same from my favorite bike forum, and hopefully meet some folk along the way. Once I get it all set up, I'll start offering to pickup parts from one member to take to the next (along my route) for zero to nearly zero $ (gotta warm the partner up to zero first). Hopefully this will give us a way to move some of the awkward parts around that UPS and others turn down or charge way too much on.
Anyway, this is still in the future at this point. Now to go do some research into building a brokerage.
Frank
Darlin 69 Ranger 390 4v, PS, DS II, disc front, 3G alternator, 67 mirror.
- 69rangerf100
- Blue Oval Guru
- Posts: 1381
- Joined: Tue Nov 27, 2007 8:14 pm
- Location: Dallas, Georgia
- Contact:
Re: Stuck on a lay over in Dallas
sorry to hear about the long trip but atleast you will be home for awhile
David
Dream as if you'll live forever, live as if you'll die today - James Dean
Daily Driver - 1998 Honda Accord
Wife's Ride - 2007 Ford Explorer Sport Trac
Project - My Dad's 1969 F100 Ranger 390 w/ 3spd manual coming soon PS, PB, A/C and alot of paint and body work - Miss you Dad
http://s936.photobucket.com/albums/ad208/69rangerf100/
Dream as if you'll live forever, live as if you'll die today - James Dean
Daily Driver - 1998 Honda Accord
Wife's Ride - 2007 Ford Explorer Sport Trac
Project - My Dad's 1969 F100 Ranger 390 w/ 3spd manual coming soon PS, PB, A/C and alot of paint and body work - Miss you Dad
http://s936.photobucket.com/albums/ad208/69rangerf100/