Hopefully I can get some pics, but I saw a couple trucks yesterday.
I. Arriving at work, the truck was pulling out of the parking entrance/exit. ONly saw it for a couple seconds, but it was nice. Same era as ours, I'm guessing an F350HD. I don't have any other info than it was white and a tow truck. If I see it again, and can snag the owner for a minute, I'll get more info.
II. While doing my rounds, saw a '67 (Identified by the grill). I'm assuming F100, cause it looked smaller than the F250, but bigger than a Ranger. No badges, not even FORD on the front. Runs nice, and looks great. Didn't get a chance to talk to the owner as I was doing rounds, but I saw it pull in, was able to go by it and get a closer look, but had to move on and finish my rounds.
III. White/blue '67 F250. Able to speak with the owner. Nice guy. Doesn't hae a PC, so no chance of hime coming here, but nice truck, and guy.
If I see any of them again, I'll ask if I can take a few pics or video, since I'll have my camera with me now.
Bumps I saw at work
Moderator: FORDification
- Sparx Macgyver
- Preferred User
- Posts: 323
- Joined: Fri Jun 25, 2010 2:06 am
- Location: Riverside, CA
- Contact:
Bumps I saw at work
[72|F100|SC|Stock]
- Sparx Macgyver
- Preferred User
- Posts: 323
- Joined: Fri Jun 25, 2010 2:06 am
- Location: Riverside, CA
- Contact:
Re: Bumps I saw at work
So, I saw another one today. Got to speak to the owner. Real nice guy. Both him and his son own 5th gen trucks, so that's pretty neat. Here's what I got of there truck. It's only two pics, but it's all I got. Though I did pull a bone-head move. Forgot to tell'em about this place.
Anyway. here it is. It's a '72 F250 Ranger XLT Camper Special.
Anyway. here it is. It's a '72 F250 Ranger XLT Camper Special.
[72|F100|SC|Stock]
- papabug71
- 100% FORDified!
- Posts: 2002
- Joined: Mon Oct 13, 2008 11:31 pm
- Location: McAlester, Oklahoma
Re: Bumps I saw at work
That old Ford has seen better days, but im willing to bet it's still stout as an ox.
Nice find
Nice find
Matt
1971 F-100 Sport Custom - My grandpaws truck
Been in the family since 10/3/'71 (Brand spankin' new)
Mine since 5/7/'94
302 / 3 speed / 3:25's
--Currently undergoing full frame off resto/mod--
- Sparx Macgyver
- Preferred User
- Posts: 323
- Joined: Fri Jun 25, 2010 2:06 am
- Location: Riverside, CA
- Contact:
Re: Bumps I saw at work
Thanks. I wish I'd been smart enough to remember this site, and ask him to join if he'd like to (unless he's a member lurking somehwere...)
but I agree. Nice looking truck and sounded pretty good starting up too! According to the guy, it was a $200 truck. Hell of a deal if you ask me.
but I agree. Nice looking truck and sounded pretty good starting up too! According to the guy, it was a $200 truck. Hell of a deal if you ask me.
[72|F100|SC|Stock]
- Doug F
- Preferred User
- Posts: 346
- Joined: Wed Oct 14, 2009 8:44 pm
- Location: H'ville, NC
- Contact:
Re: Bumps I saw at work
That's a GREAT truck! It is a lot like mine, UGLY! Though beauty is only skin deep
It'll be a while before mine "looks" nice, but it will be working solid and the drivetrain not leaking when I start to use it.
On a side note, tonight after visiting my mother-in-law at the nursing home, the neighborhood behind the place had 3 bumps in it! Blue, Orange and Green (I think) and one was a 4x4; I love seeing them around!
It'll be a while before mine "looks" nice, but it will be working solid and the drivetrain not leaking when I start to use it.
On a side note, tonight after visiting my mother-in-law at the nursing home, the neighborhood behind the place had 3 bumps in it! Blue, Orange and Green (I think) and one was a 4x4; I love seeing them around!
Doug F
FALLOUT Grafix
Denver, CO
1967 F100 4wd 4spd
http://www.pinheadlounge.com/Pinecone
https://www.facebook.com/PineconeDesign
FALLOUT Grafix
Denver, CO
1967 F100 4wd 4spd
http://www.pinheadlounge.com/Pinecone
https://www.facebook.com/PineconeDesign
- Sparx Macgyver
- Preferred User
- Posts: 323
- Joined: Fri Jun 25, 2010 2:06 am
- Location: Riverside, CA
- Contact:
Re: Bumps I saw at work
That is awesome! I wish there were more in my local area's I frequent. I love seeing the trucks and talking to the owners. Allot fo them are really cool people. Usually wiht some neat or interesting stories.
[72|F100|SC|Stock]
-
- 100% FORDified!
- Posts: 2071
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: Bumps I saw at work
Maybe out west, but in the Rust Belt that would be a clean ,unrestored survivor.papabug71 wrote:That old Ford has seen better days, but im willing to bet it's still stout as an ox.
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Bumps I saw at work
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- Sparx Macgyver
- Preferred User
- Posts: 323
- Joined: Fri Jun 25, 2010 2:06 am
- Location: Riverside, CA
- Contact:
Re: Bumps I saw at work
I've been through that thread...oye...
I'll go post it over there too.
I'll go post it over there too.
[72|F100|SC|Stock]