5 SPEED

No tech discussion, please

Moderator: FORDification

Post Reply
foghorn
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 889
Joined: Thu Jul 20, 2006 4:29 am
Location: Oklahoma, Wagoner
Contact:

5 SPEED

Post by foghorn »

What 5 speed is a direct bolt in behind a 302 if any. This is for my son's truck it has a 3 speed right now.





Foggy 8)
Work is for people that dont know how to fish
cdeal28078
100% FORDified!
100% FORDified!
Posts: 1982
Joined: Mon Aug 15, 2005 8:45 am
Location: North Carolina, Huntersville

Re: 5 SPEED

Post by cdeal28078 »

Many of them are if you have the right flex plate, bell housing and input shaft. IF you get everything except the flexplate from a 5.0 Mustang I would think that would be a pretty much bolt in deal except for the tranny mount and drive shaft. Fles plate will need to match the bell housing in tooth count and size and balance for your older 302.
A lot more out there know much more than me though so wait to hear from them
clint
71 F100 SportCustom
460 C6. Disc Brake/Power-steering/automatic Swap. 3.00
1986 Bronco 5.0 AOD
User avatar
eggman918
Blue Oval Guru
Blue Oval Guru
Posts: 1098
Joined: Fri Nov 20, 2009 12:56 pm
Location: Paulden,AZ.

Re: 5 SPEED

Post by eggman918 »

the M5odr2 has the small ford bolt pattern it is in F-150's from late 80's to mid 90's with the 4.9L6,5.0 and 5.7V8 :2cents:
Steve.
Steve

The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner

"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?
foghorn
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 889
Joined: Thu Jul 20, 2006 4:29 am
Location: Oklahoma, Wagoner
Contact:

Re: 5 SPEED

Post by foghorn »

Well i guess we will have to maybe change the trans mount maybe the drive shaft and go to the hydro type clutch. I think from 1980 on they went to this type of clutch in the trucks. Any more info will be very helpful.




Foggy 8)
Work is for people that dont know how to fish
User avatar
eggman918
Blue Oval Guru
Blue Oval Guru
Posts: 1098
Joined: Fri Nov 20, 2009 12:56 pm
Location: Paulden,AZ.

Re: 5 SPEED

Post by eggman918 »

My truck had the 4 speed and the drive shaft needed to be shortened and the cross member moved back aprox 4" the M5od uses the same slip yoke that a C4 uses,might be the same as 3 speed :? clutch is hydraulic but not too hard to retrofit.Hope this helps.
Steve.
You do not have the required permissions to view the files attached to this post.
Steve

The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner

"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?
foghorn
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 889
Joined: Thu Jul 20, 2006 4:29 am
Location: Oklahoma, Wagoner
Contact:

Re: 5 SPEED

Post by foghorn »

Eggman is that part on the clutch pedal made from channel iron and flat plate?




foggy 8)
Work is for people that dont know how to fish
User avatar
eggman918
Blue Oval Guru
Blue Oval Guru
Posts: 1098
Joined: Fri Nov 20, 2009 12:56 pm
Location: Paulden,AZ.

Re: 5 SPEED

Post by eggman918 »

plate oops 1"x2" bar with a slot in it for the peddle to fit in
Steve

The"Filthy Beast"- '68 F-250 Crew Cab 131"W/B 4x4 4BT compounds hx30/Wh1c,5x.012" sac injectors/ZF 5/NP203-205 /3.54 44 trutrack front/60 trutrack rear on 33's. 2nd owner

"Beauty is only skin deep....Ugly is to the bone"
It is more important to understand what you don't know than what you do know,because then you can start to learn..???
"you must deal with the attaboys and the ass chewing s with your head up and looking them in the eyes" T.J.E. aka My Dad
There are only three types of people wolves, sheepdogs, and sheep. What are you?
User avatar
Ranchero50
Moderator
Moderator
Posts: 5799
Joined: Wed Nov 08, 2006 7:02 pm
Location: Maryland, Hagerstown
Contact:

Re: 5 SPEED

Post by Ranchero50 »

Tremec TKO or 3550 will bolt up, might need a different clutch disk and driveshaft yoke depending on which tranny you end up with.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue

Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Post Reply