New Wheels/Tires on my 67 Mercury
Moderator: FORDification
-
- New Member
- Posts: 86
- Joined: Tue Oct 25, 2011 3:11 pm
- Location: Calgary, Alberta, Canada
New Wheels/Tires on my 67 Mercury
1967 Mercury M100
Put on the new wheels and tires today. 245/60/15 on 7"/front and 275/60/15 on 8"/rear
Now I need to finish the side emblems (see 67 emblems before and after topic) and wax the oxidized paint. The project continues!! Some previous additions from previous owner like the chrome trim on hood and rear reflectors under tail lights.
http://s1229.photobucket.com/albums/ee4 ... 080258.jpg
http://s1229.photobucket.com/albums/ee4 ... 080277.jpg
http://s1229.photobucket.com/albums/ee4 ... 080253.jpg
http://s1229.photobucket.com/albums/ee4 ... 080270.jpg
http://s1229.photobucket.com/albums/ee4 ... 080266.jpg
Dave
Put on the new wheels and tires today. 245/60/15 on 7"/front and 275/60/15 on 8"/rear
Now I need to finish the side emblems (see 67 emblems before and after topic) and wax the oxidized paint. The project continues!! Some previous additions from previous owner like the chrome trim on hood and rear reflectors under tail lights.
http://s1229.photobucket.com/albums/ee4 ... 080258.jpg
http://s1229.photobucket.com/albums/ee4 ... 080277.jpg
http://s1229.photobucket.com/albums/ee4 ... 080253.jpg
http://s1229.photobucket.com/albums/ee4 ... 080270.jpg
http://s1229.photobucket.com/albums/ee4 ... 080266.jpg
Dave
- mybros71
- Preferred User
- Posts: 290
- Joined: Tue Jan 27, 2009 11:00 pm
Re: New Wheels/Tires on my 67 Mercury
Looking real nice! If it was me, I might think about leveling that truck out with some shackles and air springs. But I wouldn't kick it off my driveway for dripping gear oil!
2006 Mustang GT (Wife's)
1962 Comet Custom (Wife's)
1971 F100 2wd Prerunner Project (Daughter's)
1971 F250 4wd "The Beast" (Son's)
2007 Toyota Tundra 4wd. (Credit Union's)
Seriously, the best truck I've ever owned, without exception.
1962 Comet Custom (Wife's)
1971 F100 2wd Prerunner Project (Daughter's)
1971 F250 4wd "The Beast" (Son's)
2007 Toyota Tundra 4wd. (Credit Union's)
Seriously, the best truck I've ever owned, without exception.
-
- 100% FORDified!
- Posts: 1982
- Joined: Mon Aug 15, 2005 8:45 am
- Location: North Carolina, Huntersville
Re: New Wheels/Tires on my 67 Mercury
Looks great. I like the stance but I am not one to lower a truck. I used to have a set of moons on my 71 years and years ago. My dad bought them off a man at the beer joint when the man lost too much money in the back room poker game. All of this while I waiting in the truck.
Wouldn't float these days would it? I went in most days but it was too late in the day after we'd split wood most all day. Dad did bring me a soda after a couple of hours and my 71 did have some pretty wheels when it was given to me about 6 years later so I can't complain. 
clint


clint
71 F100 SportCustom
460 C6. Disc Brake/Power-steering/automatic Swap. 3.00
1986 Bronco 5.0 AOD
460 C6. Disc Brake/Power-steering/automatic Swap. 3.00
1986 Bronco 5.0 AOD
- thrush544
- Preferred User
- Posts: 308
- Joined: Fri Apr 02, 2010 8:29 pm
- Location: A North Western PAer in South Eastern PA
Re: New Wheels/Tires on my 67 Mercury
Your Merc is looking good .... nice job .... nice truck! 

"Courage is being scared to death, but saddling up anyway." - John Wayne
Proverbs 3: 5-6
Proverbs 3: 5-6
- mk
- Blue Oval Fanatic
- Posts: 917
- Joined: Wed Mar 02, 2005 1:12 am
- Location: CANADA, central Alberta
Re: New Wheels/Tires on my 67 Mercury
Sharp truck, Dave. If it's got a 390, a set of those 390 fender badges would be a nice touch. Did you get the original owners manual with it?
mike
mike
Always drink upstream from the herd...
~Will Rogers
Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
~Will Rogers
Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
- F100builder
- Blue Oval Guru
- Posts: 1304
- Joined: Thu Jan 10, 2008 6:55 pm
- Location: Idaho, Nampa
Re: New Wheels/Tires on my 67 Mercury
Outstanding! The truck is looking real sharp! 

Patrick




'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56




'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
- HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: New Wheels/Tires on my 67 Mercury
That's not oil. That's the honey dripping from such a sweeeeet ride.mybros71 wrote:Looking real nice! If it was me, I might think about leveling that truck out with some shackles and air springs. But I wouldn't kick it off my driveway for dripping gear oil!
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
-
- New Member
- Posts: 86
- Joined: Tue Oct 25, 2011 3:11 pm
- Location: Calgary, Alberta, Canada
Re: New Wheels/Tires on my 67 Mercury
Hi guys.
That's for the compliments. I am pretty sure the box is off a newer ford. Tail lights say 70'. Most of the marks on the driveway are from my 2004 f150 as well as water from just bringing the truck home from the car wash. That being said it does have a small tranny leak.
Mike, I do not have the original manual. The previous owner passed away so I bought this truck off his wife. Her father was the original owner so someday I will have to ask the history? He lives in BC. I do have all the tear down/restoration photos from 1998. It was my brothers best friends truck that he got from his father in law. The more I work on it the more things I see. Such as the box, the rear reflectors that you mentioned as well as the chrome trim on the hood. Also muffler brackets under the bed for duel exhaust but it only has single exhaust. Just picked up new classic wipers blades today that match the ones in the photos.
The motor and truck still needs lots of work.
Dave
That's for the compliments. I am pretty sure the box is off a newer ford. Tail lights say 70'. Most of the marks on the driveway are from my 2004 f150 as well as water from just bringing the truck home from the car wash. That being said it does have a small tranny leak.
Mike, I do not have the original manual. The previous owner passed away so I bought this truck off his wife. Her father was the original owner so someday I will have to ask the history? He lives in BC. I do have all the tear down/restoration photos from 1998. It was my brothers best friends truck that he got from his father in law. The more I work on it the more things I see. Such as the box, the rear reflectors that you mentioned as well as the chrome trim on the hood. Also muffler brackets under the bed for duel exhaust but it only has single exhaust. Just picked up new classic wipers blades today that match the ones in the photos.
The motor and truck still needs lots of work.
Dave
-
- Blue Oval Guru
- Posts: 1257
- Joined: Sat Jan 08, 2011 6:45 pm
- Location: Comox Valley B.C. Canada
Re: New Wheels/Tires on my 67 Mercury

- still got my first first car 20+yrs later : 69 f100 sorta kinda pretending its a Mercury M100 w/a 70 f350 sport custom cab (factory buckets) 67 grille with 69 ranger cooneyes 68 merc box and hood,some supercool fiberglass fenders i scored way back when, 76 f150 disc brake frontend..currently running a 90 5.0HO 4bbl/c4 auto & 3.50 posi...originally a 360/c6 f100 Ranger with dealer added towpack (incl. kelsey hays trailer brake),boxside toolbox,behind the seat stowage & belly tank...only original parts left on 'er are the frame,rear end,rear springs,and rear bumper...
- mk
- Blue Oval Fanatic
- Posts: 917
- Joined: Wed Mar 02, 2005 1:12 am
- Location: CANADA, central Alberta
Re: New Wheels/Tires on my 67 Mercury
I doubt the box is newer if there's no lower rear side reflectors. Likely just a case of someone using newer rear lenses and the '69 Ranger rear reflectors. I'll check my stash to see if I've got another manual.
mike
mike
Always drink upstream from the herd...
~Will Rogers
Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
~Will Rogers
Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
-
- New Member
- Posts: 183
- Joined: Sun Aug 05, 2007 9:28 pm
- Location: CANADA, CALGARY
Re: New Wheels/Tires on my 67 Mercury
Nice truck Dave
, I am almost certain i saw that truck sitting on the previous owners driveway for years in the NW.
I had my eye on it for awhile. Good thing for you, i didn't know it was for sale
. I have some parts trucks if you
need any parts.

I had my eye on it for awhile. Good thing for you, i didn't know it was for sale

need any parts.