1967 parts

Madman · Post by **Madman** » Sat May 12, 2012 9:10 pm

While part hunting, I had a guy tell me there was a difference between 67 trucks, and the 68-72 trucks. Does anyone know if all the parts of the body are interchagable from a 67 to a 70? I am looking to use the bed and fenders potentially. Thanks.

PS- my belief is there are no major differences, just molding/trim

67mann · Post by **67mann** » Sun May 13, 2012 5:15 am

http://www.fordification.com/tech/67-72ID_01.htm
The doors and bed as far as body parts are the same style,but different as far as components. The problem I just encountered with a 67 bed and a 70 frame with Flex-O-Matic Suspension. I'll have to notch the bed rail for the hanger bracket.

Madman · Post by **Madman** » Sun May 13, 2012 9:22 am

I'm looking at putting it on a Highboy, so not sure if that will need a notching or not

flyboy2610 · Post by **flyboy2610** » Sun May 13, 2012 12:31 pm

http://www.fordification.com/tech/67-72ID_01.htm
This will outline the differences.

67mann · Post by **67mann** » Mon May 14, 2012 5:28 am

Madman wrote:I'm looking at putting it on a Highboy, so not sure if that will need a notching or not

In the brochure(70s) it say's it standard issue,but I'm not sure that would include Hiboys....if you have one of these(B.)

then you got flex-o-matic

The FORDification.com Forums

1967 parts

1967 parts

Re: 1967 parts

Re: 1967 parts

Re: 1967 parts

Re: 1967 parts