Need a measurement please
Moderator: FORDification
-
gearhead920
- New Member
- Posts: 5
- Joined: Sat Dec 15, 2012 12:24 am
Need a measurement please
I don't know if this is the right spot or not, but I need some assistance with a measurement. On a f100 2wd I need the distance from the fender/door gap to the center of the front hub with the wheels pointed straight. I am trying to locate the wheel in the fender well. Thanks in advance.
1968 Ranger project (as if I needed another one)
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Need a measurement please
This might help:gearhead920 on Mon Dec 31, 2012 7:45 pm
I don't know if this is the right spot or not, but I need some assistance with a measurement. On a f100 2wd I need the distance from the fender/door gap to the center of the front hub with the wheels pointed straight. I am trying to locate the wheel in the fender well. Thanks in advance.
Stop by the welcome mat and say hi when you get a chance:
http://www.fordification.com/forum/viewforum.php?f=1
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
gearhead920
- New Member
- Posts: 5
- Joined: Sat Dec 15, 2012 12:24 am
Re: Need a measurement please
That should do it, Thank You very much, I appreciate it.
1968 Ranger project (as if I needed another one)
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: Need a measurement please
Your quite welcome. 
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4