1967 F100 Resurrection - On The Road Again!
Moderator: FORDification
- pincheweddo
- Preferred User
- Posts: 363
- Joined: Mon Sep 14, 2009 11:59 pm
- Location: Texas, Fort Worth
- Contact:
1967 F100 Resurrection - On The Road Again!
Thank you - All of you who have posted your information to this site. You've showed me a lot of cool stuff.
I've been a FORDification member since 1983. I know that is before the internet, but had it existed I would have been a member. I was running around West Texas in the 80's scrounging parts to up grade the truck one bolt at a time by pulling up to peoples houses and asking about the wrecked truck in the backyard.
My intention was to post to this site to share with all that helped me with so many tid bits of information. However, due to family members scattered all over the great state of Texas who have taken an interest in the project I was forced to use blogger as a documenting resource. I would NEVER try to hijack Fordification! I just want to give you the location of my project in the event the information contained within might give someone an idea so I can give back to the F'in (F100) community.
http://1967f100.blogspot.com
Please contact me if you have questions.
Pinche
I've been a FORDification member since 1983. I know that is before the internet, but had it existed I would have been a member. I was running around West Texas in the 80's scrounging parts to up grade the truck one bolt at a time by pulling up to peoples houses and asking about the wrecked truck in the backyard.
My intention was to post to this site to share with all that helped me with so many tid bits of information. However, due to family members scattered all over the great state of Texas who have taken an interest in the project I was forced to use blogger as a documenting resource. I would NEVER try to hijack Fordification! I just want to give you the location of my project in the event the information contained within might give someone an idea so I can give back to the F'in (F100) community.
http://1967f100.blogspot.com
Please contact me if you have questions.
Pinche
Last edited by pincheweddo on Sun Jun 29, 2014 7:47 pm, edited 27 times in total.
- pincheweddo
- Preferred User
- Posts: 363
- Joined: Mon Sep 14, 2009 11:59 pm
- Location: Texas, Fort Worth
- Contact:
Re: 1967 F100 Resurrection
I have had a few updates and discovered that I am not a very good sheet metal man.
Last edited by pincheweddo on Tue Apr 02, 2013 9:21 pm, edited 2 times in total.
- pincheweddo
- Preferred User
- Posts: 363
- Joined: Mon Sep 14, 2009 11:59 pm
- Location: Texas, Fort Worth
- Contact:
Re: 1967 F100 Resurrection
Last edited by pincheweddo on Tue Apr 02, 2013 9:19 pm, edited 4 times in total.
- stephen44
- Blue Oval Fan
- Posts: 655
- Joined: Thu Jun 11, 2009 3:28 pm
- Location: Danville, VA
Re: 1967 F100 Resurrection
interesting blog
keep posting - subscribed ! - I'm doing the same to my '67 too.
keep posting - subscribed ! - I'm doing the same to my '67 too.
thanks
Stephen
(1967 F100, FE352, 2wd, 3 on the tree, flareside)
Stephen
(1967 F100, FE352, 2wd, 3 on the tree, flareside)
- pincheweddo
- Preferred User
- Posts: 363
- Joined: Mon Sep 14, 2009 11:59 pm
- Location: Texas, Fort Worth
- Contact:
Re: 1967 F100 Resurrection
GREAT! Do you have a thread that you are posting to? I would like to see what you are doing.stephen44 wrote:interesting blog
keep posting - subscribed ! - I'm doing the same to my '67 too.
- Alstoyz
- Preferred User
- Posts: 289
- Joined: Thu Aug 16, 2012 10:43 pm
- Location: Gainesville, Tx
Re: 1967 F100 Resurrection
I'm digging the project!!! It's nice to see all the fellow north Texans doing our part to keep the bumps alive!!! I just subscribed to your build. Keep up the good work!!!
1970 F-100 SWB Tubbed
1971 F-350 4X4 (traded for 71 crewcab)
1971 F-250 Crew-Cab Dually
1972 F-100 SWB 4X4
1972 F-350 Crew-Cab 4X4 Dually
2001 F-350 Crew-Cab Short Bed 4X4 Dually
1971 F-350 4X4 (traded for 71 crewcab)
1971 F-250 Crew-Cab Dually
1972 F-100 SWB 4X4
1972 F-350 Crew-Cab 4X4 Dually
2001 F-350 Crew-Cab Short Bed 4X4 Dually
- stephen44
- Blue Oval Fan
- Posts: 655
- Joined: Thu Jun 11, 2009 3:28 pm
- Location: Danville, VA
Re: 1967 F100 Resurrection
sure http://www.fordification.com/forum/view ... hp?t=43559pincheweddo wrote:GREAT! Do you have a thread that you are posting to? I would like to see what you are doing.stephen44 wrote:interesting blog
keep posting - subscribed ! - I'm doing the same to my '67 too.
slow going - but getting their
thanks
Stephen
(1967 F100, FE352, 2wd, 3 on the tree, flareside)
Stephen
(1967 F100, FE352, 2wd, 3 on the tree, flareside)
- pincheweddo
- Preferred User
- Posts: 363
- Joined: Mon Sep 14, 2009 11:59 pm
- Location: Texas, Fort Worth
- Contact:
Re: 1967 F100 Resurrection
Dude! that seriously looks like a mirror of what I have done! Keep up the good work!stephen44 wrote:sure http://www.fordification.com/forum/view ... hp?t=43559pincheweddo wrote:GREAT! Do you have a thread that you are posting to? I would like to see what you are doing.stephen44 wrote:interesting blog
keep posting - subscribed ! - I'm doing the same to my '67 too.
slow going - but getting their
- pincheweddo
- Preferred User
- Posts: 363
- Joined: Mon Sep 14, 2009 11:59 pm
- Location: Texas, Fort Worth
- Contact:
Re: 1967 F100 Resurrection
Got some stuff done this weekend. Most importantly these stainless body mounts that I made.
- Heirloom
- Blue Oval Fan
- Posts: 549
- Joined: Fri Feb 08, 2013 2:33 pm
- Location: Paradise
Re: 1967 F100 Resurrection
Love the handle, pincheweddo
Great looking project! I'm on board!
Great looking project! I'm on board!
~Heirloom
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
- pincheweddo
- Preferred User
- Posts: 363
- Joined: Mon Sep 14, 2009 11:59 pm
- Location: Texas, Fort Worth
- Contact:
Re: 1967 F100 Resurrection
Thanks and Thanks! Post a picture of your ride or a link so I can check it out.Heirloom wrote: Love the handle, pincheweddo
Great looking project! I'm on board!
- Heirloom
- Blue Oval Fan
- Posts: 549
- Joined: Fri Feb 08, 2013 2:33 pm
- Location: Paradise
Re: 1967 F100 Resurrection
Link is in my signature
~Heirloom
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
- pincheweddo
- Preferred User
- Posts: 363
- Joined: Mon Sep 14, 2009 11:59 pm
- Location: Texas, Fort Worth
- Contact:
Re: 1967 F100 Resurrection
Damn! Thanks, didnt see it.Heirloom wrote:Link is in my signature
- pincheweddo
- Preferred User
- Posts: 363
- Joined: Mon Sep 14, 2009 11:59 pm
- Location: Texas, Fort Worth
- Contact:
Re: 1967 F100 Resurrection
Still making progress. I am really digging the Valspr Anti Rust Armor paint. Just hope it holds up well.
- pincheweddo
- Preferred User
- Posts: 363
- Joined: Mon Sep 14, 2009 11:59 pm
- Location: Texas, Fort Worth
- Contact:
Re: 1967 F100 Resurrection
Got the interior sanded and painted this weekend. Gettib close to putting parts back on it. Can't wait cause my shop is a wreck.
Last edited by pincheweddo on Sun May 26, 2013 9:26 am, edited 1 time in total.