This is the fresh canvass I just recently traded my '71 F350 4x4 dually for. My plan for this one is to start with converting the front suspension over to a '75 dually front disc setup, and eventually adding some dropped I-beams and a rear hanger/shackle kit. Install a '70 Mustang 22 gallon fuel tank in the rear frame rails and removing the in-cab tank. My plans are to run the 240 I-6 that the PO "Greg Morton" had installed but eventually replace it with a 460/C6 combination. Add a roll pan, and a set of 40/20/40 seats from 92-97 F350. Wish me luck!!!
You do not have the required permissions to view the files attached to this post.
2015 Camaro-2001 GMC Safari-1984 F250 6.9/T19 2wd-1974 Dodge D100 short fleetside~ 72 wife ~ late model kids, a Chocolate Lab named Coco and a white rabbit named Marshmallow...now I need a ferret named Graham and I will have S'mroes!!!..
Nice truck! She looks to be in pretty good condition.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
Geeze.. Seeing a bunch of running crews on here recently and everyone getting to play with them makes me want mine back soooo bad! But I just have to wait as it is still getting work done. My big worry now is that when I get it back, it will be so perfect that I am afraid I will scratch it when putting it all back together. I almost wish I hadn't done a complete frame off restoration. If I hadn't, I would be messing with it right now!
Congrats on your new project and its good to see that crew stay in the Fordification family!!
Well, between honey do's, the stepsons baseball tournament. I got a few things done on the crew today!!! Got the I-beams, springs, and 2 wheels back from my buddy's paint & blast shop. I was able to install new studs on the rear hubs to allow the installation of dual wheels. It appears I will be needing to widen the rear inner wheel wells to allow for clearance of the inside tire...
You do not have the required permissions to view the files attached to this post.
My plan for this one is to start with converting the front suspension over to a '75 dually front disc setup, and eventually adding some dropped I-beams and a rear hanger/shackle kit. Install a '70 Mustang 22 gallon fuel tank in the rear frame rails and removing the in-cab tank. My plans are to run the 240 I-6 that the PO "Greg Morton" had installed but eventually replace it with a 460/C6 combination. Add a roll pan, and a set of 40/20/40 seats from 92-97 F350. Wish me luck!!! 
