My 88'f-150 needs a new rear diff. LONG story, don't ask!
I found a 8.8 thru a buddy of mine from a 94'.
My 88' drive shaft has slip on one end, std yoke on diff end.
This 94' has slip on one end with flange mount on diff end.
94' driveshaft is questionable. possible damage.
Any one know if i can use my 88' shaft with the 94' flange adaptor on it and not bottom out the slip yolk in my trans?
I would measure it all out but 94' truck is 150 miles away at an abandon family farm.
Thanks
Two-bit
87'-96' f-150 drive shaft questions?
Moderator: FORDification
-
two-bit
- Blue Oval Fan
- Posts: 620
- Joined: Thu Jul 06, 2006 6:19 pm
- Location: Michigan, Ishpeming
87'-96' f-150 drive shaft questions?
Living life full throttle on the North Coast of America!!!
72' F-350, DRW, 360, NP435, Dana 70, 159" WB, P.S., P.B., 12' flatbed, 10,000 GVW.
72' F-350, DRW, 360, NP435, Dana 70, 159" WB, P.S., P.B., 12' flatbed, 10,000 GVW.
-
9t3svt
- New Member
- Posts: 104
- Joined: Sun Dec 09, 2012 11:32 pm
- Location: Yankton, South Dakota
Re: 87'-96' f-150 drive shaft questions?
If the length isn't right that way, just change the flange. 