67 F100 resto mod LWB
Moderator: FORDification
-
- New Member
- Posts: 14
- Joined: Wed Oct 01, 2014 2:25 pm
67 F100 resto mod LWB
I'm new to this forum but I've been working on my 67 for about 5 months and finally decide to get a build post up so this is the story. I was selling my old Cherokee when someone emailed me about a trade for a f100 with a inline 6 in it so I figured he was only a 15 minute ride and that it couldn't hurt to go look so I got there and it was in primer needed fenders and had some bondo in the bed and stuff so I just went for it I thought the truck was so cool anyway (I only payed 300$ for the jeep) so I got it home rebuilt the carb drove it around alittle bit and it burnt oil when it was cold and ran like total crap even after the rebuild there was only a small improvement so I decided to take it apart and do the build my plan is to do a CV swap and a modular 4.6 swap while completely restoring the truck here are some pictures of the stuff ive done over the past couple months.
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 14
- Joined: Wed Oct 01, 2014 2:25 pm
Re: 67 F100 resto mod LWB
more Pictures
You do not have the required permissions to view the files attached to this post.
- RebStew
- New Member
- Posts: 51
- Joined: Thu Sep 18, 2014 1:02 am
- sargentrs
- 100% FORDified!
- Posts: 9866
- Joined: Fri Jun 22, 2007 9:30 am
- Location: Georgia, Jasper
Re: 67 F100 resto mod LWB
Great progress! Rear end looks awesome.
Randy
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
1970 F100 Sport Custom Limited LWB, 302cid, 3 on the tree. NO A/C, NO P/S, NO P/B. Currently in 1000 pcs while rebuilding. Project thread: http://www.fordification.com/forum/view ... 22&t=59995 Plan: 351w, C4, LSD, pwr front disc, p/s, a/c, bucket seats, new interior and paint.
1987 F-150 XLT Lariat, 5.0/C6 auto.
- Heirloom
- Blue Oval Fan
- Posts: 549
- Joined: Fri Feb 08, 2013 2:33 pm
- Location: Paradise
Re: 67 F100 resto mod LWB
It's my trucks older brother, gray primer, striped to it's bones and everything!
Nice work. Welcome aboard!
~Heirloom
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
- flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
Re: 67 F100 resto mod LWB
Lookin' good!
BTW, you have good taste in chain saws! I really like my MS-290 Farm Boss. I don't know why Stihl quit making that one, though.
BTW, you have good taste in chain saws! I really like my MS-290 Farm Boss. I don't know why Stihl quit making that one, though.
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
-
- New Member
- Posts: 14
- Joined: Wed Oct 01, 2014 2:25 pm
Re: 67 F100 resto mod LWB
Stihl makes some really nice saws we recently swapped over from home heating oil to all wood. I got some more pictures uploaded to my computer and picked up a CV front end from a local junkyard for 200$ but cutting the original twin I beam was quite the task but here are some PICS Enjoy!
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 14
- Joined: Wed Oct 01, 2014 2:25 pm
Re: 67 F100 resto mod LWB
getting the frontend all bolted in I used 1 1/8" black iron piping drilled wholes through the top of the frame and slide the pipe in and burned them on came out really nice
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 14
- Joined: Wed Oct 01, 2014 2:25 pm
Re: 67 F100 resto mod LWB
went to the automotive flee market this weekend picked up a tail gate off a guy has no rust or rot but its for the older body style without the serifs but I thing it looks better without it. Also I got the crown vic and pulled the 4.6 out and stripped the harnesses from the car oh and by the way im doing this whole build behind my parents house on the patio ha
You do not have the required permissions to view the files attached to this post.
- Heirloom
- Blue Oval Fan
- Posts: 549
- Joined: Fri Feb 08, 2013 2:33 pm
- Location: Paradise
Re: 67 F100 resto mod LWB
Protect their concrete....ask me how I learned.
I like Stihls. Good power in most every package. I really like their 'climber' saws. Possibly the best one I have used. I have mostly Husky's, but am tired of oiler problems. Husky's always have poor oiling after a short time. May have to save up for a new saw soon.Stihl makes some really nice saws we recently swapped over from home heating oil to all wood.
~Heirloom
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
'68 F250 360, 4 spd Project Thread!
Plans are for a stout 400, C6, 3.54 gears, 33" BFG AT's, bucket seats and custom console. Final assembly, nearing start up...
"Those who hammer their guns into plows will plow for those who do not."
~ Thomas Jefferson
"America will never be destroyed from the outside. If we falter and lose our freedoms, it will be because we destroyed ourselves."
~ Abraham Lincoln
- flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
Re: 67 F100 resto mod LWB
The patio behind my house is where I have to work also. Winter and thunderstorms kind of bring things to a halt. Knowhutimean, Vern?
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
-
- New Member
- Posts: 14
- Joined: Wed Oct 01, 2014 2:25 pm
Re: 67 F100 resto mod LWB
Oh yea it sucks working outside sometimes it feels like your working backwards and yup got the speedy dri everywhere pulling that 4.6 was really messy I drained everything before I pulled it but there is always just enough left to make a mess but here are some more pictures of the project! I went and picked up my motor mounts at napa they finally came in and I was able to set the motor in the frame. Also I was working on a way to make the crown vic fuel pump to work so I cut the mounting ring out of the CV's tank and welded it into the f100 tank what does everyone think?
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 17
- Joined: Wed Oct 08, 2014 8:52 am
Re: 67 F100 resto mod LWB
looking real good! A friend of mine is at about the same stage as you are with his 68.
-
- New Member
- Posts: 14
- Joined: Wed Oct 01, 2014 2:25 pm
Re: 67 F100 resto mod LWB
More Pictures I got the 4.6 all cleaned up and painted the car only had 100k on it so I did valve cover gaskets, oil pan gasket, oil filter adapter gasket, timing chain cover gasket, new intake gaskets+throttle body gasket too, and finally the exhaust manifold gaskets then painted it ford engine blue! its cool to see a 4.6 like that never seen one painted blue look slick though!
You do not have the required permissions to view the files attached to this post.
-
- New Member
- Posts: 1
- Joined: Sat Oct 04, 2014 2:35 pm
Re: 67 F100 resto mod LWB
I like the blue mod motor, Great idea!! I've been trying to find fuel tank ideas... This was the first one I found on here so far. Looks like a great idea. I'm assuming thats the in cab tank?