Hey all, it's been a few years since I was on here.
Is the dentside forum still up? I go to https://www.fordification.net/forums/index.php and I just get a 404 not found. There's a homepage with the technical links, but is the forum gone?
What happened to the Dentside Forum?
Moderator: FORDification
-
- New Member
- Posts: 96
- Joined: Fri Aug 03, 2007 6:45 pm
- Location: Washington
- jzjames
- 100% FORDified!
- Posts: 1780
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
Re: What happened to the Dentside Forum?
http://fordification.net/
I dont know. Sometimes I get the “404” for unknown reasons. I imagine it as someone is working on the site.
I dont know. Sometimes I get the “404” for unknown reasons. I imagine it as someone is working on the site.
-
- New Member
- Posts: 96
- Joined: Fri Aug 03, 2007 6:45 pm
- Location: Washington
Re: What happened to the Dentside Forum?
That link just takes me to the home page with the technical info links, but there's no link there for the forums that I can see.jzjames wrote:http://fordification.net/
I dont know. Sometimes I get the “404” for unknown reasons. I imagine it as someone is working on the site.
- DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: What happened to the Dentside Forum?
I should make it clear I don’t know for sure, but I think the forum is turned off.
There during the last time we were overrun by spammers there were literally thousands of spam post...
There during the last time we were overrun by spammers there were literally thousands of spam post...
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
- basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: What happened to the Dentside Forum?
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: What happened to the Dentside Forum?
I think it died because there were no mods.
The automated spam has been horrendous here the past couple weeks. You guys don't see it because new member need approval to post and it eats up the mods time to contribute.
The automated spam has been horrendous here the past couple weeks. You guys don't see it because new member need approval to post and it eats up the mods time to contribute.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
- DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: What happened to the Dentside Forum?
You aren’t kidding, i really want to ban 37.*.*.* but I’m afraid i might catch someone legitimate.Ranchero50 wrote:I think it died because there were no mods.
The automated spam has been horrendous here the past couple weeks. You guys don't see it because new member need approval to post and it eats up the mods time to contribute.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: What happened to the Dentside Forum?
I was just deleting the posts but then noticed that if I didn't ban them that another batch of posts showed up a week later.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
- DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
Re: What happened to the Dentside Forum?
Yup that happens when I don’t ban them too, plus I’m about 60% on the IP ban letting me in... of course they are hopping IP all over the globe but there is a lot of netblock 37 and 41...
BTW if anyone wants to see what it would look like if we didn’t delete the spam hop on over to OLDSmobility... (don’t click on anything)
BTW if anyone wants to see what it would look like if we didn’t delete the spam hop on over to OLDSmobility... (don’t click on anything)
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper