390 oil filter adapter
Moderator: FORDification
-
NC72crew
- New Member
- Posts: 48
- Joined: Tue May 28, 2019 7:59 pm
- Location: Salisbury N.C.
390 oil filter adapter
I need an oil filter adapter for a 390. I was changing my oil sending unit and it cracked. Not sure if it for a car or a truck but its definitely after 68 because its high flow. It points down.
Words of wisdom. Dont sweat the petty things and dont pet the sweaty things...
-
bobslaven
- New Member
- Posts: 46
- Joined: Sun Mar 15, 2020 4:17 pm
Re: 390 oil filter adapter
I might have one before long (like this weekend). Thinking about mounting my filter up horizontally again, which could free up my functional adapter. I'll send a note if I go that route and succeed.
-
FLASH 1
- New Member
- Posts: 227
- Joined: Thu Jun 09, 2005 8:26 pm
- Location: North Carolina, Reidsville
Re: 390 oil filter adapter
car and truck will interchange, BUT, BUT the car is vertical and truck is horizontal BUT if you want to use the vertical, Motorcraft DOES MAKE a filter that will fit in the chassis of a truck with that adapter on it
Tom, where Ford Trucks Rule
1956 Big Window
1964 F-750 Flat Bed
1965 M-100 Mercury
1966 M-350 Mercury
1966 F350 Wrecker
1972 F-350 Crew Cab
1997 F-450 7.3 with 85,000 original miles
2006 F-150 Crew Cab
2008 F-650 Crew Cab Roll Back 6.7 Cummins
2020 Flat Top Peterbilt Roll Back PX-7 Engine
and 2 cars 1968 XLT and 2017 Mustang
1956 Big Window
1964 F-750 Flat Bed
1965 M-100 Mercury
1966 M-350 Mercury
1966 F350 Wrecker
1972 F-350 Crew Cab
1997 F-450 7.3 with 85,000 original miles
2006 F-150 Crew Cab
2008 F-650 Crew Cab Roll Back 6.7 Cummins
2020 Flat Top Peterbilt Roll Back PX-7 Engine
and 2 cars 1968 XLT and 2017 Mustang
-
NC72crew
- New Member
- Posts: 48
- Joined: Tue May 28, 2019 7:59 pm
- Location: Salisbury N.C.
Re: 390 oil filter adapter
Thanks for the leads. I ended up buying a new one for 50 bucks from cjponys.
Words of wisdom. Dont sweat the petty things and dont pet the sweaty things...