Just pick up a 72 f 100 with a 360.
I go to put the key in and it did nothing start the truck. I replace the starting relay. That did nothing to fix the problem. You can crank the truck over jumping the relay but nothing with the key.
I replace the ignition swith and the key tumbler with new. this still did not fix the problem
Could it be the coil or a wire on the coil causing this problem.
How would one go about troubleshooting then fixing this issue.
Ignition Problem
-
- New Member
- Posts: 3
- Joined: Wed Jun 07, 2006 10:46 pm
- Location: Washington
-
- Preferred User
- Posts: 336
- Joined: Thu Mar 02, 2006 8:21 pm
- Location: CANADA, BC VAN. ISLAND
- Contact:
-
- New Member
- Posts: 3
- Joined: Wed Jun 07, 2006 10:46 pm
- Location: Washington
re: Ignition Problem
It is Auto Trans, Where might that switch be located?
-
- New Member
- Posts: 3
- Joined: Wed Jun 07, 2006 10:46 pm
- Location: Washington
re: Ignition Problem
Well with your information I was able to get the truck started with the key. Thanks so much now I think I will have to fix that part
- flyboy2610
- 100% FORDified!
- Posts: 4901
- Joined: Sun Oct 03, 2004 6:42 pm
- Location: Nebraska, Lincoln
re: Ignition Problem
Glad you got it going! ![Very Happy :D](./images/smilies/icon_biggrin.gif)
![Very Happy :D](./images/smilies/icon_biggrin.gif)
"If the women don't find you handsome, they should at least find you handy."
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html
Red Green
If you're going to live like there's no hell...............
you'd better be right.
http://theworldasiseeit-flyboy2610.blog ... ee-it.html