bought a dentside doner for the bump

No tech discussion, please

Moderator: FORDification

Post Reply
Jarred Hodges
Preferred User
Preferred User
Posts: 269
Joined: Fri Jul 10, 2009 12:02 pm
Location: Dora Alabama

bought a dentside doner for the bump

Post by Jarred Hodges »

Me and my dad haul junk cars and scrap to make extra money. We deal with a new yard that opened and the owner is cool. He will sell you anything that comes in for a little more than scrap price. I have bought a model a axle 4x2 sbc intake, performer rpm intake and other stuff from him. We went by there today and I saw an old dent that had came in there. I figure just another 302 or fe truck. I open the hood and see a big block. I think its a 460. Look again and realize that it is. I see the owner and ask. He says they loaded it with scrap and drove it in there. I ask how much for it. He says make offer, I ask him to price it and he says $400, I say sold. We went back and get it and I put a battery on it and drove it on the trailer. It has a terrible exhaust leak and needs a tuneup but the engine seems in good shape. I plan to rebuild it and swap it into the bump probaly next summer. For a while I will have a yard truck. Here are some pics of it
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
1971 F-100 swb 401 fe , edelbrock intake, cam, valve covers, longtube headers with twin 2.5 inch exhaust, aluminum wheels.
1965 Mustang 350 glide 7.45 at 90mph
1972 maverick 460 swap in progress
2002 z28 a few bolt ons
User avatar
AK F100
Preferred User
Preferred User
Posts: 337
Joined: Fri Mar 30, 2007 12:43 pm
Location: Eagle River, AK

Re: bought a dentside doner for the bump

Post by AK F100 »

Good score. I've seen much worse go for much more.
GPBFD Pyro Maniac
Daily Driver: 1974 F100 4x4 (ride'n on 8-Luggers) Build in progress
1997 F-350 Crew Cab 4x4, 7.3L Diesel SOLD
Pile-O-Parts: 1968 F100 - 2WD Shorty SOLD
Looking for a new project 57-60 Ford Truck
Jarred Hodges
Preferred User
Preferred User
Posts: 269
Joined: Fri Jul 10, 2009 12:02 pm
Location: Dora Alabama

Re: bought a dentside doner for the bump

Post by Jarred Hodges »

AK F100 wrote:Good score. I've seen much worse go for much more.
agreed. I have been wanting to build a 460 for my truck but most people want $400-$500 for a stock engine. I basically bought the truck for what he gave for it. Plus I get all the stuff to swap it into my truck
1971 F-100 swb 401 fe , edelbrock intake, cam, valve covers, longtube headers with twin 2.5 inch exhaust, aluminum wheels.
1965 Mustang 350 glide 7.45 at 90mph
1972 maverick 460 swap in progress
2002 z28 a few bolt ons
Jarred Hodges
Preferred User
Preferred User
Posts: 269
Joined: Fri Jul 10, 2009 12:02 pm
Location: Dora Alabama

Re: bought a dentside doner for the bump

Post by Jarred Hodges »

I plan on leaving this truck together until I can afford a rebuild and swap it into my truck. Dad said if we tuned this one up we should take it to tnt. I thought about it but can't say I want to go any amount of speed in this truck. lol
1971 F-100 swb 401 fe , edelbrock intake, cam, valve covers, longtube headers with twin 2.5 inch exhaust, aluminum wheels.
1965 Mustang 350 glide 7.45 at 90mph
1972 maverick 460 swap in progress
2002 z28 a few bolt ons
Jarred Hodges
Preferred User
Preferred User
Posts: 269
Joined: Fri Jul 10, 2009 12:02 pm
Location: Dora Alabama

Re: bought a dentside doner for the bump

Post by Jarred Hodges »

today I got to messing with it. The ignition box was leaking goo so I put another one I had on it. I cleaned up an old set of spark plugs and put them in. The gas tank leaks bad. I ran a hose from the fuel pump to a 2 gallon gas jug. I crank it up and it idles smooth and revs clean. Tie gas jug up so I got to test it out. Go back and forth a little to make sure everything works. Ok its time for some fun. I pull in the driveway and powerbrake it. I stop after a get a huge smoke cloud going. Let everything settle and do it again. I decided to stop before I blew the old mud grip out. Is it sad that a stock 460 truck from the junkyard with $10 worth of work runs harder than my 390 .060 over headers cam inatke holley and rebuilt heads.
1971 F-100 swb 401 fe , edelbrock intake, cam, valve covers, longtube headers with twin 2.5 inch exhaust, aluminum wheels.
1965 Mustang 350 glide 7.45 at 90mph
1972 maverick 460 swap in progress
2002 z28 a few bolt ons
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: bought a dentside doner for the bump

Post by basketcase0302 »

Jarred,
Awesome score young man!
There's a lot more parts there than just the 460! :thup:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
bobsgarage
New Member
New Member
Posts: 85
Joined: Sun Sep 12, 2010 8:57 pm
Location: Indiana

Re: bought a dentside doner for the bump

Post by bobsgarage »

Hot score dude, I had a customer couple of monthes ago, that needed a 460 for his motorhome, cost me 1100.00 and him about 1800.00.
Dude for 400.00, I will drive a LLLLLLLLLLLLOOOOOOOOOOOOONNNNNNNNNNNNNNNGGGGGGGGGGGGGGG WAY. Good score today.
USMC 1985/92 Semper Fi Oohrah...
1967 F100 352 3spd auto SB ( new project )
1984 Chryler Lebaron Conv.( Inherited )
1999 Lincoln Towncar Signature Ser. 4.6lt, Metalic Blue(daily driver)
2004 Ford Explorer 4X4 4.0 ltr, 7 Passenger (wife driver)
Stupidity should be more painful !
Jarred Hodges
Preferred User
Preferred User
Posts: 269
Joined: Fri Jul 10, 2009 12:02 pm
Location: Dora Alabama

Re: bought a dentside doner for the bump

Post by Jarred Hodges »

bobsgarage wrote:Hot score dude, I had a customer couple of monthes ago, that needed a 460 for his motorhome, cost me 1100.00 and him about 1800.00.
Dude for 400.00, I will drive a LLLLLLLLLLLLOOOOOOOOOOOOONNNNNNNNNNNNNNNGGGGGGGGGGGGGGG WAY. Good score today.
lol. I have been wanting to do a 460 swap but all I could find was engine that were already pulled that needed rebuilding and they wanted $500-$800 for them. I honestly doubt if I wil rebuild this engine. It runs great and doesn't smoke.
1971 F-100 swb 401 fe , edelbrock intake, cam, valve covers, longtube headers with twin 2.5 inch exhaust, aluminum wheels.
1965 Mustang 350 glide 7.45 at 90mph
1972 maverick 460 swap in progress
2002 z28 a few bolt ons
User avatar
bobsgarage
New Member
New Member
Posts: 85
Joined: Sun Sep 12, 2010 8:57 pm
Location: Indiana

Re: bought a dentside doner for the bump

Post by bobsgarage »

Some things are best left alone.....
USMC 1985/92 Semper Fi Oohrah...
1967 F100 352 3spd auto SB ( new project )
1984 Chryler Lebaron Conv.( Inherited )
1999 Lincoln Towncar Signature Ser. 4.6lt, Metalic Blue(daily driver)
2004 Ford Explorer 4X4 4.0 ltr, 7 Passenger (wife driver)
Stupidity should be more painful !
Post Reply