The Ranger XLT @ Holley Ford Fest 2024 in Bowling Green KY After Missing HRPT 2019 and Power Tour 2021
Moderator: FORDification
- DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
The Ranger XLT @ Holley Ford Fest 2024 in Bowling Green KY After Missing HRPT 2019 and Power Tour 2021
I posted this on the POR15 tread, but since its kind of buried I thought I would start a "Project tread"
A little more progress today:
Of the 4 sets of valve covers that I have, these are the only ones that clear the rocker studs. Hopefully they won't hit the brake booster.
The carb and valve covers are not permanently installed yet. I still have to adjust the valves and do some other house keeping on getting a couple of bolts swapped for the correct size.
Hopefully not too much longer.
A little more progress today:
Of the 4 sets of valve covers that I have, these are the only ones that clear the rocker studs. Hopefully they won't hit the brake booster.
The carb and valve covers are not permanently installed yet. I still have to adjust the valves and do some other house keeping on getting a couple of bolts swapped for the correct size.
Hopefully not too much longer.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
- MAK
- Blue Oval Fan
- Posts: 528
- Joined: Tue Dec 21, 2004 9:35 am
- Location: Georgia, Blairsville - Florida, Flagler Beach
- Contact:
re: The Ranger XLT may run again soon.
Looking good!
- 1968Ranger
- New Member
- Posts: 119
- Joined: Sun Jul 18, 2004 8:39 pm
- Location: South Carolina
- Contact:
re: The Ranger XLT may run again soon.
That looks bitchen? I am jealous.
Mike
Mike
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: The Ranger XLT may run again soon.
If it runs as good as it looks, you've got a winner!
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
- New Member
- Posts: 3
- Joined: Fri Feb 18, 2005 10:29 pm
- Location: Georgia, Carrollton
re: The Ranger XLT may run again soon.
Thats great. You know you cant beat the look of a detailed Ford engine
Thats how I roll!
- GT-Racer
- Preferred User
- Posts: 417
- Joined: Thu Jul 22, 2004 6:33 pm
- Location: West Virginia, Parkersburg
re: The Ranger XLT may run again soon.
Boy that sure is puuurty.
'67 F100 2wd shortbed - Beginning restoration.
351w, 5-speed, 3:70 gears (someday)
Drivin' a Chevy is Kinda Like wipin' before you poop, it just don't make no sense....
351w, 5-speed, 3:70 gears (someday)
Drivin' a Chevy is Kinda Like wipin' before you poop, it just don't make no sense....
- DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
re: The Ranger XLT may run again soon.
Little more Progress Today.
Plan is to fire it off by Sunday, I have quite a bit of little stuff yet to come like the stainless heater fittings, and 70 CJ PCV stuff.
As long as Dennis at DSC comes through with the Crank spacer we should be on goal.
Where is the :fingerscrossed: smilie?
Plan is to fire it off by Sunday, I have quite a bit of little stuff yet to come like the stainless heater fittings, and 70 CJ PCV stuff.
As long as Dennis at DSC comes through with the Crank spacer we should be on goal.
Where is the :fingerscrossed: smilie?
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
- 4x4x4crewcab
- Preferred User
- Posts: 380
- Joined: Mon Jul 19, 2004 8:14 pm
- Location: Nebraska, Omaha
- Contact:
re: The Ranger XLT may run again soon.
That looks really nice. You have my shipping address right? If not the soonest I could pick it up would be Sat.
Robert that looks great. How did the engine compartment/firewall turn out?
Robert that looks great. How did the engine compartment/firewall turn out?
Mark
1970 Ford F-250 Crew Cab 4x4 short box
1969 Volkswagen Karmann Ghia
1999 Ford Windstar
1983 Chevrolet Silverado p/u
1990 Lincoln Town Car
1998 Lincoln Town Car
Does your truck need emblems? Check out http://www.onceuponapart.com
1970 Ford F-250 Crew Cab 4x4 short box
1969 Volkswagen Karmann Ghia
1999 Ford Windstar
1983 Chevrolet Silverado p/u
1990 Lincoln Town Car
1998 Lincoln Town Car
Does your truck need emblems? Check out http://www.onceuponapart.com
- DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
re: The Ranger XLT may run again soon.
The firewall and inner fenders turned out nice. The core support will look fine once installed.
The painter made about two days extra work for me by failing to remove the steering columb so I had to pull it, strip it and paint it. BTW, "Medium Blue Poly" interior paint can only be mixed in Lacquer, at 40 pucks a pint!
It'll probably turn out fine because I didn't have a dust free spray area so I'll have to polish it.
I spent the beginning of the week remounting most of the hardware with a Stainless Kit.
I am ready to be at a stopping point!!!
The painter made about two days extra work for me by failing to remove the steering columb so I had to pull it, strip it and paint it. BTW, "Medium Blue Poly" interior paint can only be mixed in Lacquer, at 40 pucks a pint!
It'll probably turn out fine because I didn't have a dust free spray area so I'll have to polish it.
I spent the beginning of the week remounting most of the hardware with a Stainless Kit.
I am ready to be at a stopping point!!!
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
- DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
re: The Ranger XLT may run again soon.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: The Ranger XLT may run again soon.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
- DuckRyder
- Moderator
- Posts: 4925
- Joined: Mon Jul 19, 2004 3:04 pm
- Location: Scruffy City
- Contact:
re: The Ranger XLT may run again soon.
It Runs, It RUNs, It freaking RUNS
It is idling at 1100 right now so I have to pull the carb and decrease the secondary gap, but I can already tell the cam is going to have a wicked idle. I can head it at 1100, 950 should nasty
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)
"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
- 4x4x4crewcab
- Preferred User
- Posts: 380
- Joined: Mon Jul 19, 2004 8:14 pm
- Location: Nebraska, Omaha
- Contact:
re: The Ranger XLT may run again soon.
Congratulations to a job well done
Mark
1970 Ford F-250 Crew Cab 4x4 short box
1969 Volkswagen Karmann Ghia
1999 Ford Windstar
1983 Chevrolet Silverado p/u
1990 Lincoln Town Car
1998 Lincoln Town Car
Does your truck need emblems? Check out http://www.onceuponapart.com
1970 Ford F-250 Crew Cab 4x4 short box
1969 Volkswagen Karmann Ghia
1999 Ford Windstar
1983 Chevrolet Silverado p/u
1990 Lincoln Town Car
1998 Lincoln Town Car
Does your truck need emblems? Check out http://www.onceuponapart.com
- dablack00
- Blue Oval Fan
- Posts: 695
- Joined: Wed Jan 12, 2005 7:32 am
- Location: Texas, Lufkin
re: The Ranger XLT may run again soon.
Awsome! I'm right behind you. I can't wait to crank up my 460. Now if I can only get around to finishing up the electronics......
Engine looks great!
Engine looks great!
- Merc Man
- New Member
- Posts: 27
- Joined: Sun Mar 13, 2005 10:51 pm
- Location: CANADA, Manitoba
re: The Ranger XLT may run again soon.
Man thats going to be one awsome ride when your done ...Congratulations
Name : Craig
Truck : 1968 Mercury M100 Custom Factory Ordered 360 v8 , Cruise-0-Matic, Camper Special leaf & Spring Package .
Truck : 1968 Mercury M100 Custom Factory Ordered 360 v8 , Cruise-0-Matic, Camper Special leaf & Spring Package .