Wheel Fitment

[demon-cleaner]

Hey guys. I have a '69 f100 2wd swb with original 302 that I'm having the CV IFS swap done. I won't be doing this myself as I don't have time, experience, tools, skills, etc. to do it. I got a guy . Still up in the air about the rear. May use an IRS from the "89-'97 T-Bird, Explorer, or use a live axle from the CV or whatever else that will work (still doing research, open to suggestions).

Anyway, my actual question pertains to whether or not a set of wheels, that I already have, will fit on said future suspension setup. The wheels are 18x8.75, 5x4.5 +20mm offset, 5.66 backspacing, 73.1 centerbore, with a load rating of 1580 lbs per wheel.

Thanks for any input & advice.