67' longbed build

1guydude · Post by **1guydude** » Thu Feb 08, 2018 7:57 pm

I just ordered a cheap carpet off ebay. We will see!
Last parts are the tail light bezels.
Get through this next hurtle and ill b able to sand and primer the body this spring or summer.

I really wanna and or need to get all the leaks fixed and new exhaust. Headers and all.
D

Manny · Post by **Manny** » Thu Feb 08, 2018 10:06 pm

1guydude wrote:I just ordered a cheap carpet off ebay. We will see!
Last parts are the tail light bezels.
Get through this next hurtle and ill b able to sand and primer the body this spring or summer.

I really wanna and or need to get all the leaks fixed and new exhaust. Headers and all.
D

Gonna be awesome to get your floor pans in and all the stuff squared away!

1guydude · Post by **1guydude** » Tue Feb 13, 2018 5:42 pm

this is the condition I found my fuel filter in. I replaced and cleaned the housing out. Maybe today ill spray some starter fluid in the carb and see if itll turn over and fire. Prime the pump and BAM.
-d

1guydude · Post by **1guydude** » Wed Feb 14, 2018 2:32 pm

Well. I wanna change my.pump but the thought off all that gas and getting it everywhere has my putting it off... :/
D

Lone Ranger · Post by **Lone Ranger** » Sat Feb 17, 2018 11:30 am

Just use a pair of vise grips to pinch the gas line going to it and have rags to catch the gas and wipe off the excess. Careful with gas soaked rags cause they can spontaneously ignite. I don't think mine leaked to bad. Of course I'm sure its a lot easier to change one on the six verses the v8

1guydude · Post by **1guydude** » Sat Feb 17, 2018 4:24 pm

well dang. Idk. I blew out the lines. took the pump off. pumps good. something must be going wrong under my time chain cover....
d

Manny · Post by **Manny** » Tue Feb 20, 2018 10:26 pm

1guydude wrote:well dang. Idk. I blew out the lines. took the pump off. pumps good. something must be going wrong under my time chain cover....
d

Your eccentric spin off???

KRob · Post by **KRob** » Sun Feb 25, 2018 11:42 am

You made mention to "Sarge upgraded fan blower" can you clue me into where and what that is. I am looking for option to increase the strength of the air coming through my heater.

Thanks
Rob

sargentrs · Post by **sargentrs** » Sun Feb 25, 2018 6:04 pm

Right here! http://www.fordification.com/forum/view ... hp?t=73960

KRob · Post by **KRob** » Sun Feb 25, 2018 10:40 pm

Thanks for that. I knew I had seen a couple threads about heater blower upgrades.... I commented on that one a long time ago.

. Thanks for pointing me to it again, maybe this time i will get it done.

1guydude · Post by **1guydude** » Thu Mar 15, 2018 5:38 pm

Im sorry all. Ive been going through a lot in my life right now and its hard to bare.
Truck went to the shop.
Got all torn down and re sealed profesonally. Tran got rebuilt. Rebuilt torque converter. Rebuilt steer gear box. New cooler lines and cooler. New starter.
I put the new lenses on but dont like the bezels on the rear lights.
D

1guydude · Post by **1guydude** » Thu Mar 15, 2018 6:10 pm

The problem was the fuel pump. Gotta clean and re seal my tank when i pull my bench seat and do the floor pans. Rust rust rust

1guydude · Post by **1guydude** » Fri Mar 16, 2018 4:18 pm

Bullitt74 · Post by **Bullitt74** » Fri Mar 16, 2018 7:47 pm

Interesting - what species is growing out of your cowl?

One step closer to mechanically sound - progress!

Lone Ranger · Post by **Lone Ranger** » Sun Mar 18, 2018 11:58 am

Looks like an eco friendly hybid with the growing greens

keep up the good work!

The FORDification.com Forums

67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build

Re: 67' longbed build