Matchbox diecast bumps

General Discussion Frequently Asked Questions
Post Reply
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Matchbox diecast bumps

Post by mk »

Thought this 'family' picture would be a good example of what to look for when trying to complete a collection or just add to knowledge of what's out there.

Image
There's the yellow Ranger wildlife truck with the lion, a red flareside with canopy, a green kennel truck with four dogs and two 4x4s (that I know of). Between the chrome and white grills, plain and superfast wheels and even paint color, there are at least half a dozen distinct versions of both the kennel truck and the flareside. The wildlife truck was also reissued in white with zebra stripes down the sides.

Image
As I'm in the midst of customizing a few, I stripped all four body types down. The 4x4 is on top followed by the wildlife truck, the kennel truck and the flareside. The kennel and flareside trucks have the nicest detail with lower side chrome and the hood peaks molded in whereas the 4x4 and wildlife trucks didn't.

Image
The tail ends are even different; l-r flareside, wildlife, 4x4 and kennel. Looks like they didn't renew a licence from Ford or something on the 4x4. The chassis plate says 'mini truck 1981' and the letters are blocked out on the tailgate.

Image
This shows all the grills used on them and in the bottom right is the reason I buy all the skanky red flaresides I find- for the interior and clear glass.

mike
Last edited by mk on Fri Nov 13, 2009 1:33 pm, edited 2 times in total.
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
User avatar
1967AceStroker
Preferred User
Preferred User
Posts: 319
Joined: Sat Oct 11, 2008 1:01 pm
Location: Pueblo, CO

Re: Matchbox diecast bumps

Post by 1967AceStroker »

I want! I want! I want! Them are really cool, but I have never seen one in real life. Aren't they a bit older matchbox models?

And where could I find one?
My Project Thread (Not updated in years.)
1967 F-100, Shortbed, 351W - 72mm Single Turbo - Megasquirt MS3x Engine Management, Tremec TKO 500, Ford 9" - Strange Nodular Center Section - Strange 35 Spline Axles - Strange Full Spool - Caltracs - DJM Drop Kit, Crown Vic IFS Swapped - 2 Coils Cut, Power Steering, Power 4 Wheel Disc Brakes, Paint - Kona Blue
brandon.k
Blue Oval Guru
Blue Oval Guru
Posts: 1080
Joined: Sat Jul 04, 2009 9:13 am
Location: Texas, Iowa Park

Re: Matchbox diecast bumps

Post by brandon.k »

Those are pretty kool
ImageImage
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Re: Matchbox diecast bumps

Post by mk »

The kennel and flareside trucks were released in '68, I think, the yellow truck in '73 and the 4x4s in '81.
The most convenient place to find them right now is ebay, now that garage sale/ swap meet season is over. My own purchases have ranged from 99 cents and up. The kennel trucks are the dearest, running from 30-40 bucks currently for plain wheel versions to 60-80 bucks (or higher) for the superfast wheel variants :eek: Of course, these are mint with box prices.


mike
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
User avatar
rjewkes
100% FORDified!
100% FORDified!
Posts: 3711
Joined: Sun Apr 17, 2005 1:09 am
Location: Missouri, Webb City
Contact:

Re: Matchbox diecast bumps

Post by rjewkes »

mk do you have any spare toppers i guess i'd only need one for the red flare side. I have a kennel that came without the doggs or the glass/plastic. how do you pull the one with the two rivets rear appart? and the '81 mini trucks kinda look like the 73 and up from the over all appaerance, still cool though.

If i had a spare interior and clear glass from a red it'd be cool to get the kennel appart without breaking it and custom it up.
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
Image
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Re: Matchbox diecast bumps

Post by mk »

The accessories are hard to come by. Haven't got any spares at the moment but I'll look around. The 4x4 body also had the side bump removed, maybe to make room for the bigger wheel openings or else it could be because of the licensing thing. Good thing they kept the grill, just molded the push bar on it. The rivets can be drilled out, same as the others.

mike
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
User avatar
rjewkes
100% FORDified!
100% FORDified!
Posts: 3711
Joined: Sun Apr 17, 2005 1:09 am
Location: Missouri, Webb City
Contact:

Re: Matchbox diecast bumps

Post by rjewkes »

cool thanks MK.

i've been watching just to find thwe new matchboxes that nobody will put on the shelves here. Somehow in the sam assortment as the E350/450 ambulance they keep missing the 59 caddilac ambulance/hurst that looks sorta like the Ecto 1 from Ghostbusters but without the GB Gear or Garb.
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
Image
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
User avatar
ximy
Preferred User
Preferred User
Posts: 372
Joined: Fri Oct 23, 2009 4:18 pm
Location: socal

Re: Matchbox diecast bumps

Post by ximy »

those are sweet.. thanks for sharing
1967 f250 428
englertstephen
New Member
New Member
Posts: 71
Joined: Wed Oct 07, 2009 6:53 pm

Re: Matchbox diecast bumps

Post by englertstephen »

I traded a couple of my hotwheels/matchbox cars to a friend for one just like that red 4x4 when I was a kid. I painted it white to look like the 71 bump my dad drove everyday. I forgot all about that until now. Those are really cool.
72 F-250 custom.
69 F-100 custom cab
AKA 71-F-250-SC-72-F-250C
User avatar
ratfink
Preferred User
Preferred User
Posts: 277
Joined: Fri Mar 18, 2005 10:10 pm
Location: Arizona, Tucson

Re: Matchbox diecast bumps

Post by ratfink »

My son stocks at a store here, this was the only one in the whole shipment. He was nice enough to snag it for me and and give it to me. It is a hotwheels, and not a matchbox, but thought you guys would still like to see it.
Ratfink

Image
Dennis
1968 F100 Ranger 390/ C6 (Mine again)
2008 Toyota FJ Cruiser Sandstorm
2007 3500 4X4 Dodge Cummins
Idleness is the mother of all vices.
User avatar
rjewkes
100% FORDified!
100% FORDified!
Posts: 3711
Joined: Sun Apr 17, 2005 1:09 am
Location: Missouri, Webb City
Contact:

Re: Matchbox diecast bumps

Post by rjewkes »

sure is nice. and now they are both mattel anyways.

I'll have to look for that one now. Funny isn't it what cars they make a zillion copies of and variations, but others only get 20-30 copies made or are exclusives for said store.
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
Image
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Re: Matchbox diecast bumps

Post by mk »

Here's a pic of five variations I've accumulated on the red flareside theme...

Image

The chrome and white grill plain wheel versions are on the left, chrome grill narrow superfast wheels next (one green, one black base) and on the right is the wide superfast wheel chrome grill version with a dark gray base. Not sure if there's a white grille superfast version.

Nice truck, ratfink, but it looks like they got the roof too small and the sides too tall...
It really doesn't cost any more to cast an accurate version, don't know why they do that

mike
Last edited by mk on Wed Nov 25, 2009 12:01 pm, edited 1 time in total.
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
User avatar
rjewkes
100% FORDified!
100% FORDified!
Posts: 3711
Joined: Sun Apr 17, 2005 1:09 am
Location: Missouri, Webb City
Contact:

Re: Matchbox diecast bumps

Post by rjewkes »

yeah looks klike they modded the one they made for the dentside sam waltons truck for walmarts, by extending the chrome that sat in the dent's bump. still nice more info fink, whats the rest of the bubble, so i know what exact collection it is in.

my red flare side had the skinny war wheel lookin tires on it, i had one of those old caddi ertl screw together metal models that when i moved i lost the body, but kept the wheels. so now it has the 5 star tires atleast thats what i call them. kinda looks like the daytona rims but less of the triangle cutouts and chrome and looks more like a star.
"It is better to keep your mouth shut and appear stupid than to open it and remove all doubt." - Mark Twain
'70 f250 4x4 Crew cab 460/C6 '72 F100 390/C6 9.8 MPG AVG. '89 Mercury Cougar LS Dual Exh. V6 . 18.9 MPG AVG. In Town.
Image
I don't want to give em a heart-attack. That is what would happen if I answered the door in the buff. Heck it almost scares me to death when I step out of the shower and look in the mirror.~Mancar1~
fuelly.com
User avatar
mk
Blue Oval Fanatic
Blue Oval Fanatic
Posts: 917
Joined: Wed Mar 02, 2005 1:12 am
Location: CANADA, central Alberta

Re: Matchbox diecast bumps

Post by mk »

Was hoping to get these customized ones done before Christmas so I could send them to friends who have done right by me in the hobby. A few hotwheels Ultra Hot 67 Mustangs and one matchbox Bronco got sacrificed for the wheels and there was a fair amount of dremel work involved on the chassis to get the interiors from the red trucks to fit these.


Image

Here's a few more bumps; from left, a '67 F600 in HO 1/87 scale from Lindberg, a '65 F600 in HO from Athearn, a 1/64 matchbox '67 and a molded rubber flareside in about 1/72 scale.

Image


mike
Last edited by mk on Mon Mar 22, 2010 4:45 pm, edited 1 time in total.
Always drink upstream from the herd...

~Will Rogers

Mercury truck ID thread:
http://www.fordification.com/forum/view ... =2&t=35331
Ford truck model history:
http://www.fordification.com/forum/view ... =2&t=37394
Using dentside fender liners:
http://fordification.com/forum/viewtopi ... =7&t=35675
Matchbox diecast bumps:
http://www.fordification.com/forum/view ... =2&t=45618
User avatar
69rangerf100
Blue Oval Guru
Blue Oval Guru
Posts: 1381
Joined: Tue Nov 27, 2007 8:14 pm
Location: Dallas, Georgia
Contact:

Re: Matchbox diecast bumps

Post by 69rangerf100 »

thats so cool? i actually have the red 4x4 from the first picture and never realized that was a bump
David

Dream as if you'll live forever, live as if you'll die today - James Dean

Daily Driver - 1998 Honda Accord
Wife's Ride - 2007 Ford Explorer Sport Trac
Project - My Dad's 1969 F100 Ranger 390 w/ 3spd manual coming soon PS, PB, A/C and alot of paint and body work - Miss you Dad
http://s936.photobucket.com/albums/ad208/69rangerf100/
Post Reply