Hi guys, I'm looking for a lap belt buckle with good chrome would like green but any color should work as long as the chrome is in very good condition.
Thanks
Ron
lap belt buckle
Moderator: FORDification
-
Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
lap belt buckle
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
Re: lap belt buckle
How exactly do you replace just the buckle as I was pretty sure both ends of the belt are lapped over and double stitched to prevent it from sliding out of the buckle? 
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
Ron_Hall
- New Member
- Posts: 214
- Joined: Sat Oct 22, 2016 2:59 am
- Location: Reno, NV
Re: lap belt buckle
Your right, but I only need the top plastic part (although I'm not sure how to get them apart yet) The chrome on my drive side is flaking off so I want to replace it. mine are green but color doesn't matter if I can strip it down to the chrome unit.basketcase0302 wrote:How exactly do you replace just the buckle as I was pretty sure both ends of the belt are lapped over and double stitched to prevent it from sliding out of the buckle?
Ron
You do not have the required permissions to view the files attached to this post.
1971 F100 SWB 390 FE - bored.030 over
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
Edelbrock Performer - Holley 600 CFI
Stock heads with some porting - Sanderson FF427 Headers
C6 with stock converter - 3.25 rear end gears
One owner...
-
Mach428
- Blue Oval Fan
- Posts: 718
- Joined: Sat Nov 12, 2005 6:00 am
Re: lap belt buckle
I have several chrome buckle covers as mentioned with good chrome. You can buy an exact color of our interior from NPD and paint the plastic piece yourself. Price is $20 each plus shipping.